I'm testing Exchange 2010/Exchange 2013 coexistence in a lab environment.  Below is the set-up:

Exchange 2010 has 2 Exchange servers.  Each server houses the CAS, mailbox and hub transport roles.  There is a DAG configured and they are installed on 2008R2 servers.

Exchange 2013 also has 2 servers.  Each server has the CAS and mailbox roles installed and there is also a DAG configured.  These Exchange servers are installed on 2012R2.

Since installing 2013, I'm struggling getting the virtual directories configured correctly for EWS, OWA etc.  Basically, I'm just looking for straight forward documentation on how the particular virtual directories should be configured for a 2010/2013 coexistence scenario.  Any help in pointing me in the right direction is appreciated.  Thanks.

We have successfully migrated all our mailboxes from Exchange 2007 to Exchange 2013SP1, except one mailbox with the 15GB size, which stalled at 95%, even we tried "Resume-MoveRequest", but again the same error:

Here is the error:

4/14/2014 10:37:56 AM [XXXXXXXX] Stage: IncrementalSync. Percent complete: 95.
4/14/2014 10:37:56 AM [XXXXXXXX] Fatal error TooManyMissingItemsPermanentException has occurred.

We have an internal help desk app that needs to use POP3 to send acknowledgements.  Everything worked fine with the previous Exchange 2010 server, but I am getting "Connection reset" from the help desk app and unexpected terminations (0x800CCC0F) from an Outlook Express client I am using to test this scenario.

The two POP3 services: the Microsoft Exchange POP3 service and the Microsoft Exchange POP3 Backend services are running.

My Test-PpoConnectivity returns this:

RunspaceId                        : 4d16307d-e2e0-4a98-b69d-f05d1a778351
Name                              : 1
ProtocolName                      : POP3
MaxCommandSize                    : 512
MessageRetrievalSortOrder         : Ascending
UnencryptedOrTLSBindings          : {0.0.0.0:110, [::]:110}
SSLBindings                       : {0.0.0.0:995, [::]:995}
InternalConnectionSettings        : {Mail.WTI.LOCAL:995:SSL, Mail.WTI.LOCAL:110:TLS}
ExternalConnectionSettings        : {}
X509CertificateName               : Mail
Banner                            : The Microsoft Exchange POP3 service is ready.
LoginType                         : PlainTextLogin
AuthenticatedConnectionTimeout    : 00:30:00
PreAuthenticatedConnectionTimeout : 00:01:00
MaxConnections                    : 2147483647
MaxConnectionFromSingleIP         : 2147483647
MaxConnectionsPerUser             : 16
MessageRetrievalMimeFormat        : BestBodyFormat
ProxyTargetPort                   : 9955
CalendarItemRetrievalOption       : iCalendar
OwaServerUrl                      :
EnableExactRFC822Size             : False
LiveIdBasicAuthReplacement        : False
SuppressReadReceipt               : False
ProtocolLogEnabled                : False
EnforceCertificateErrors          : False
LogFileLocation                   : C:\Program Files\Microsoft\Exchange Server\V15\Lo
LogFileRollOverSettings           : Daily
LogPerFileSizeQuota               : 0 B (0 bytes)
ExtendedProtectionPolicy          : None
EnableGSSAPIAndNTLMAuth           : True
Server                            : MAIL

I need some help regarding what might be wrong.

Thanks!

Hello,

We are a culinary school and recently received our .EDU domain. My question is: How do I change the domain in exchange to reflect this new change? Ex.: accountant@abc.com should then be accountant@abc.edu

Our Exchange Server is 2010

Thanks in advance for your advise,

Rey 

reycestero@escuelahotelera.com

 Log in to ECP -> Organiztion -> APPS

 Below error reported after selecting APPS

 Error: The request failed. unable to connect to the remote server.

 Note: Same error reported on other exchange 2013 servers.

So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.

My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation.   Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.   

[06/12/2014 20:05:19.0860] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
[06/12/2014 20:05:19.0876] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
[06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
[06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
[06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
[06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
[06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
[06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
[06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
[06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
[06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
[06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
[06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
[06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
[06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
[06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
[06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[06/12/2014 20:05:44.0830] [0] Applying default role selection state
[06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
[06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.

Hi,

When I type in https://mail.mydomain.local it auto redirects to https://mail.mydomain.local/owa.

I checked 'IIS 8.0 manager -> default web site -> http redirect' and there are no redirects here.

'iis -> default web site' also shows that the default document is 'iisstart.htm'.

How can I get the 'default web site' to show 'iisstart.htm' instead of it redirecting to https://mail.mydomain.local/owa?

I remember when I first installed Exchange 2013, 'iisstart.htm' showed up. Perhaps CU3 update changed it to auto go to https://mail.mydomain.local/owa.

Thanks

Dear All,

Our company will moving from Exchange 2010 to Exchange Online and we have a on-premise WinSer 2008R2 for AD.

Currently, user have to login to our domain and use the same ID and PW to access their outlook.

1.If we move to Exchange online, do we have to do anything with our on-premise AD server?

2.If user prefer using only one ID and PW for PC to access domain and Exchange online, what should we do?

3.Is there any point or do we still need current on-premise AD server after we moved to Exchange Online?

Thank you so much for your attention and help!


Best regards,

Shiloh

Hello All...

Trying to uninstall Exchange 2013 CUv2 v2. I've moved all the Mailboxes, Arbitration, Discovery, Public Folder, etc to another working server. Everything was moved over fine. Uninstall via the control panel proceeded as normal, then just failed. No choice but to exit. Now when trying to recover, and uninstall again....I cannot. I get the vague error of "An incomplete installation was detected.  Run setup to complete Exchange installation." 

Not that I want to, but tried to reinstall, but can't do that either.

I know it's a last resort and not supported, but can I just use ASDIEdit ,and manually remove the server references? If so, what is a good guide on the procedure....? I don't want spend hours pouring over setup logs and the registry if I don't have to- just want this removed from AD.

I've searched the net quite a bit on manual removal, but can't find a concise how-to...

Any help is appreciated ...Thanks

We are in the process of doing a staged migration from exchange 2003 to office 365. We have dirsync working and have migrated most of our mailboxes to office365. We have also converted all migrated mail boxes to mail enabled users that have been migrated. After we finish with migrating the last mailbox and convert it to a mail enabled use we would like to completely decommission our on-premises Exchange organization. We are not using a single sign-on solution and there is no federated server just dirsync. The Migrate Mailboxes to Exchange Online with a Staged Migrationhttp://technet.microsoft.com/en-us/library/jj874018(v=exchg.150).aspx says “Decommissioning Exchange can have unintended consequences. Before decommissioning your on-premises Exchange organization, we recommend that you contact Microsoft Support”. Well no one at Microsoft Support will talk to me because support for Exchange 2003 has ended. 

The procedure for Uninstalling Exchange Server 2003http://technet.microsoft.com/en-us/library/bb125110(EXCHG.65).aspx says before you begin that you cannot uninstall Exchange Server 2003 from a server if it is the only server in your organization running the Recipient Update Service. Instead, you must first use Exchange System Manager to enable the Recipient Update Service on another server. Well this is the last exchange server so I have no place to move it to.

I need to know the correct procedure for Decommissioning the last exchange 2003 server after migrating to office 365.I also must avoid the “unintended consequences” that the Mailboxes to Exchange Online with a Staged Migration procedure warns about.

Greetings all,

I've got a new Exchange 2013 setup and external internet users have been reporting that attachments they receive from internal users are showing only as winmail.dat (why does this problem still exist?!?)

In Exchange 2010 I had a transport rule that sent *everything* to the internet as plain-text to stop this happening, but I can't seem to find any info on how to do this in Exchange 2013. There's no obvious options in the ECP, so I'm guessing it's a powershell command?

Hi All,

Getting extremely frustrated now with a new Exchange 2013 installation on a Windows Server 2012 VM...

After having a lot of problems with the installation (didn't uninstall visual c++ which caused failure, then needed to delete the AD Microsoft Exchange System Objects group due to permission failures, etc) I've now got a fully installed Exchange server. Still, now I cannot figure out how to fix my next problem - Accessing the EAC/ECP.

I've searched every possible web guide/forum thread and the only one which is the same issue I'm having is this one: http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/89c42771-78c9-4d94-88e5-557320eccc71 

Unfortunately, as you can see in that thread, it is still unresolved. 

Current Issue: trying to access https://localhost/ecp (or any other variation) returns a 404 Not Found.

The error page points the physical path to c:\inetpub\wwwroot\ecp however that folder does not exist. I have tried manually changing the IIS site (Exchange Back End) to point its physical path to C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\ecp which seems to be valid, however it doesn't work...

Not sure what else to do... HELP!

Oli

when movng on-premises mailbox to office 365 using remote powershell (needed due to LargeItemLimit)  i'm getting the error messge "the call to https://domain.com/EWS/mrsproxy.svc timed out. Error details: the request channel timed out attempting to send after 00:00:07.5524000".Any suggestions on how tp resolve this?

We are running Exchange 2010.  For our e-mail addresses we use the formatfirstname.lastname@domain name.    This works fine until we get a username with a number after it.

E.g. 1st John Doe ->  jdoe - > John.Doe@happy.com

       2nd John Doe -> jdoe1 -?  John.Doe1@happy.com

       3rd  John Doe - > jdoe2 -> John.Doe2@happy.com

Is there any way to configure the e-mail addresses in Exhange so that the correct e-mail address is associated with the account when the exchange mailbox is created.  Currently we have to manually fix any account that do exactly matchfirstname.lastname@happy.com 

Hello,

Domain A - Source domain with Exchange Mailboxes and AD account

Domain B - Target domain which will host only mailbox (Linked).  AD account will remain in Domain A.

If I have an existing "Mail User" in Domain B with a matching External SMTP address of a user mailbox which is to be moved from Domain A I find that the target address is not set correctly when running the following preparemoverequest.ps1 script.

prepare-moverequest.ps1 -remoteforestdomaincontroller sourcedc.source.local -remoteforestcredential $remotecredentials -localforestdomaincontroller targetdc.target.local -localforestcredential $localcredentials -targetmailuserou "ou=migrated,dc=target,dc=local" -verbose -identity testuser -mailboxdeliverydomain source.ex.local -linkedmailuser -overwritelocalobject -uselocalobject

I specify "-mailboxdeliverydomain" to set the required target address but this is not set and the targetaddress remains the same.

I guess I could workaround this by scripting the change but I wonder why it does not set the target address as I have specified.  Note if a Mail User does not already exist the script correctly sets the target address to the domain specified in -mailboxdeliverydomain.

In addition after the mailbox is moved the mailbox is set to a User Mailbox and not linked mailbox.  In the preparemoverequest I specify the -linkedmailuser switch and disable the AD account for the mail user in the source domain.  This can be fixed after the mailbox move by running the following command but I wonder why this is happening?

set-user -id user1 -linkedmasteraccount source\user1 -linkeddomaincontroller sourcedc.source.local -linkedcredential(get-credential)

Many Thanks

Mark

Hi,

I need to decommission an exchange 2003 server from my environment but the original installation media was lost in an office move. Is there any downloadable content with the files needed to un-install Exchange Server 2003 STD?

Thanks,

I am trying to upgrade from CU3 to CU5.  Running the commands below return these results:

>Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms

Welcome to Microsoft Exchange Server 2013 Cumulative Update 5 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.

Performing Microsoft Exchange Server Prerequisite Check

    Prerequisite Analysis                                                                                         COMPLETED

Configuring Microsoft Exchange Server

    Extending Active Directory schema                                                                             COMPLETED

>Setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms

Welcome to Microsoft Exchange Server 2013 Cumulative Update 5 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.

Performing Microsoft Exchange Server Prerequisite Check

    Prerequisite Analysis                                                                                         COMPLETED

Configuring Microsoft Exchange Server

    Organization Preparation                                                                                      FAILED
     The following error was generated when "$error.Clear();
        install-AdministrativeGroup -DomainController $RoleDomainController

" was run: "Microsoft.Exchange.Data.Directory.ADObjectAlreadyExistsException: Active Directory operation failed on WS12-AD.XXXXX.org. The object 'CN=Folder Hierarchies,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XXXXX,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXXX,DC=org' already exists. ---> System.DirectoryServices.Protocols.DirectoryOperationException: The object exists.
   at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
   at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
   at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
   at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
   at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
   at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
   at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
   at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InstallConfigurationObject[TObject](ADObjectId id, Boolean force, TObject instance)
   at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.

>setup /m:upgrade  /IAcceptExchangeServerLicenseTerms

Welcome to Microsoft Exchange Server 2013 Cumulative Update 5 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Languages
Mailbox role: Transport service
Client Access role: Front End Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Management tools
Client Access role: Client Access Front End service

Performing Microsoft Exchange Server Prerequisite Check

    Configuring Prerequisites                                                                                     COMPLETED
    Prerequisite Analysis                                                                                         COMPLETED

Configuring Microsoft Exchange Server

    Organization Preparation                                                                                      FAILED
     The following error was generated when "$error.Clear();
        install-AdministrativeGroup -DomainController $RoleDomainController

" was run: "Microsoft.Exchange.Data.Directory.ADObjectAlreadyExistsException: Active Directory operation failed on WS12-AD.XXXXX.org. The object 'CN=Folder Hierarchies,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XXXXX,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=XXXXX,DC=org' already exists. ---> System.DirectoryServices.Protocols.DirectoryOperationException: The object exists.
   at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
   at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
   at Microsoft.Exchange.Data.Directory.PooledLdapConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation, Nullable`1 clientSideSearchTimeout, IActivityScope activityScope, String callerInfo)
   at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Directory.ADDataSession.AnalyzeDirectoryError(PooledLdapConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
   at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException, Boolean isSync)
   at Microsoft.Exchange.Data.Directory.ADDataSession.ExecuteModificationRequest(ADObject entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
   at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
   at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InstallConfigurationObject[TObject](ADObjectId id, Boolean force, TObject instance)
   at Microsoft.Exchange.Management.Deployment.InstallAdministrativeGroup.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.

I can't seem to find any more info about this error and could use some help resolving it.

Thank you,

Joe