Server Upating

December 29, 2014, 4:44 pm

≪ Previous: Public Folder Access in a Migration phase

We have two Exchange 2013 cu3 Servers on Server 2012. We want to migrate to Exchange 2013sp1 (cu7) and Server 2012r2. The servers are in a DAG at this time, and we would like to add a Server with the Edge Transport Role. I know that I will need to bring in New r2 servers, and that I will need to disable the DAG because the servers will be different OSs. But what would be the best and most time efficient steps to get through this migration of updating to the latest Exchange and the operating system. Thank you for any assistance with this.

↧

adding other domains

January 16, 2015, 5:37 am

≫ Next: Exch2013 CU5 upgrade to CU6 or CU7

≪ Previous: Server Upating

Currently our exchange 2013 is setup for incoming & outgoing mail for abc.org. How can I setup a new domain 123.org?

I will need for 123.org to be primary, but if someone sends to abc.org we will still receive those emails.

↧

Exch2013 CU5 upgrade to CU6 or CU7

January 16, 2015, 7:32 am

≫ Next: Exchange 2013 Public Folder Migration fails - A large item was encountered: Item (IPM.Note)

≪ Previous: adding other domains

Hello,

We currently are running Exch2013 CU5 in coexistance with Exch 2007. We are almost done migrating all users off 2007, and hopefully will be able to decom them soon (unless something comes up forcing us to keep them). We want to upgrade to cu6 or cu7. The only complaint we have with cu5 is iOS syncs outlook notes. if updated on the iOS device, the note is unreadable in outlook. this will be a big deal for alot of our users.

Anyways, CU6 has document issues (and fixes) for coexistance with 2007. at this time would it be advised to jump straight to cu7 or are their any issues that would make the upgrade to CU6 a better idea at this point?

let me know if any other info would be helpful. Thanks.

↧

Exchange 2013 Public Folder Migration fails - A large item was encountered: Item (IPM.Note)

January 16, 2015, 12:55 pm

≫ Next: Displaying recipient photos in Outlook

≪ Previous: Exch2013 CU5 upgrade to CU6 or CU7

I am working on a on premise Exchange 2010 to 2013 migration (mailboxes are migrated) with a large public folder database (176GB). The old server had a 5MB limit on PF attachment sizes, however, some older folders and some newer ones did not have a limit applied and has 15MB+ attachments.

After following the TechNet article to migration PF folders (have done this many times in the past without issues), the PF migration fails. I have included the output from Get-PublicFolderMigrationRequest | Get-PublicFolderMigrationRequestStatistics -IncludeReport | FL below. I have verified all connectors are set over 30MB, the attachment size limit on the old public folder has now been removed and set to unlimited (after the PF migration started).

I would like to know if there is a way to increase the attachment sizes on the PF migration. I have found there are limits when moving to O365, but can't seem to find too much information on premise.

All attachments need to be moved. I do not want to set the largeitemlimit and not migrate these attachments.

1/15/2015 5:13:00 PM [NH-CBGEX01] A large item was encountered: Item (IPM.Note)
Subject:"Re: Phoebe Berks - Delivery #2 - Scheme B cam 1", Size: 7.039 MB
(7,380,412 bytes), Folder:"06096 Phoebe Berks Cottages"
1/15/2015 5:13:10 PM [NH-CBGEX01] A large item was encountered: Item (IPM.Note)
Subject:"FW: Revised Switchgear Layout", Size: 14.17 MB (14,856,345 bytes),
Folder:"07100 CIA Utility Relocation"
1/15/2015 5:13:15 PM [NH-CBGEX01] A large item was encountered: Item (IPM.Note)
Subject:"RE: Revised Switchgear Layout", Size: 14.17 MB (14,857,325 bytes),
Folder:"07100 CIA Utility Relocation"
1/15/2015 5:13:15 PM [NH-CBGEX01] Stage: CopyingMessages. Percent complete: 43.
1/15/2015 5:13:15 PM [NH-CBGEX01] Copy progress: 156035/183221 messages, 44.95 GB
(48,263,255,527 bytes)/172.5 GB (185,234,779,443 bytes), 130/2389 folders completed.
1/15/2015 5:13:16 PM [NH-CBGEX01] Fatal error TooManyLargeItemsPermanentException
has occurred.

What can be done to increase the attachment limit on the on premise Exchange or force the migration to copy these large items? Again removing them or manually migrating them is not really an option.

↧

Displaying recipient photos in Outlook

January 13, 2015, 9:31 pm

≫ Next: Error reported after Exchange 2013 Setup (initialize-ExchangeUniversalGroups)

≪ Previous: Exchange 2013 Public Folder Migration fails - A large item was encountered: Item (IPM.Note)

Hello,

Our HR department would like to have all employees' photographs available in Outlook. When creating an email message, at the bottom of the email message window there is a list of recipients where their photos can be shown. How do I upload the photos? Does it need to be uploaded to the GAL? I use Exchange 2010/Outlook2010.

Thank you.

↧

Error reported after Exchange 2013 Setup (initialize-ExchangeUniversalGroups)

January 16, 2015, 1:24 pm

≫ Next: Setup encountered a problem while validating the state of Active Directory: The Active Directory organization configuration version etc

≪ Previous: Displaying recipient photos in Outlook

My Exchange 2013 setup reported the error below. Just wondering if someone has experienced this and how easy it was to fix.

Error:
The following error was generated when "$error.Clear();
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions

" was run: "Microsoft.Exchange.Management.Tasks.InvalidWKObjectException: The well-known object entry B:32:C262A929D691B74A9E068728F8F842EA:CN=Organization Management\0ADEL:81ee6b49-29e5-41ff-93d4-30c547de15b1,CN=Deleted Objects,DC=ad,DC=mydomain,DC=co on the otherWellKnownObjects attribute in the container object CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=ad,DC=mydomain,DC=co points to an invalid DN or a deleted object. Remove the entry, and then rerun the task.
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateGroup(ADOrganizationalUnit usgContainer, String groupName, Int32 groupId, Guid wkGuid, String groupDescription, GroupTypeFlags groupType, Boolean createAsRoleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateRoleGroup(ADOrganizationalUnit usgContainer, RoleGroupDefinition roleGroup)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.CreateAndValidateRoleGroups(ADOrganizationalUnit usgContainer, RoleGroupCollection roleGroups)
at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Roger

↧

Setup encountered a problem while validating the state of Active Directory: The Active Directory organization configuration version etc

January 16, 2015, 10:22 am

≫ Next: Unable to access ECP/OWA

≪ Previous: Error reported after Exchange 2013 Setup (initialize-ExchangeUniversalGroups)

I'm trying to set up Exchange 2013.

There are two errors - not sure which one is fatal (perhaps both)

Eror 1: Setup encountered a problem while validating the state of Active Directory: The Active Directory organization configuration version (15870) is higher than Setup's version(15844). Therefore, PrepareAD can't be executed. See the Exchange setup log for more information on this error.

Error 2: Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group

The 2nd error surprises me because I've logged in with an account that has access to pretty much everything. I tried a second account, same result. Perhaps it has something to do with the process running as administrator.

Additional info: this is the 2nd time I have set up an Exchange 2013 server on the domain. This is probably why we have the version issue. I scrubbed the first server because it corrupted.

I have tried:

Installing from the dvd
Setup /PrepareAD /IAcceptExchangeServerLicenseTerms (on both the Exchange machine and the domain controller)
Deleting all the Exch containers in active directory (but not deleted entries from the schema)

Anyone help?

Roger

↧

Unable to access ECP/OWA

November 27, 2012, 3:59 pm

≫ Next: Exchange 2013 not installing, gives error message that sp3 needs to be applied to exchange 2010

≪ Previous: Setup encountered a problem while validating the state of Active Directory: The Active Directory organization configuration version etc

I installed Exchange 2013 on 2 brand new Server 2012 virtual machines, one with the mailbox role and another with the CAS roles. The installation completed without errors but I cannot log on to the ECP (or OWA for that matter). As I enter my user/pass, the password field goes blank and a number of event log entries are added (see below).

I'm using the default administrator account (also Enterprise Admin, Domain Admin and member of the Organization Management security groups). I mail-enabled the account with enable-mailuser + enable-mailbox. I can execute Exchange Powershell cmdlets when logged on with this account, so security looks good.

The problem is OWA/ECP which consistenly logs the following errors when I attempt to access the OWA:

[Ecp] An internal server error occurred. The unhandled exception was: System.Security.Cryptography.CryptographicException: Invalid provider type specified.

at System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer)

at System.Security.Cryptography.Utils.GetKeyPairHelper(CspAlgorithmType keyType, CspParameters parameters, Boolean randomKeyContainer, Int32 dwKeySize, SafeProvHandle& safeProvHandle, SafeKeyHandle& safeKeyHandle)

at System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair()

at System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey()

at Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication)

at Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication)

at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClassa.<OnBeginRequest>b__9()

at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)

---------------------------------------------------------------------

[Owa] An internal server error occurred. The unhandled exception was: System.Security.Cryptography.CryptographicException: Invalid provider type specified.

at System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer)

at System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair()

at System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey()

at Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication)

at Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication)

at Microsoft.Exchange.HttpProxy.ProxyModule.<>c__DisplayClassa.<OnBeginRequest>b__9()

at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)

---------------------------------------------------------------------------

Event code: 3005

Event message: An unhandled exception has occurred.

Event time: 28/11/2012 0:47:38

Event time (UTC): 27/11/2012 23:47:38

Event ID: 12c0aac14e0c45b093e860f6699b0d76

Event sequence: 4

Event occurrence: 3

Event detail code: 0

Application information:

Application domain: /LM/W3SVC/1/ROOT/Rpc-2-129985330412727995

Trust level: Full

Application Virtual Path: /Rpc

Application Path: C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc\

Machine name: <cleaned up>

Process information:

Process ID: 4848

Process name: w3wp.exe

Account name: NT AUTHORITY\SYSTEM

Exception information:

Exception type: HttpException

Exception message: The client disconnected.

at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.EndProcessRequest(IAsyncResult result)

at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)

Request information:

Request URL: http://<cleaned up>/rpc/rpcproxy.dll?688b9c54-fc83-47a6-bf82-343799d288d5@falcora.net:6001

Request path: /rpc/rpcproxy.dll

User host address: fe80::d58e:d780:34ed:af68C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc\

User: FALCORA\SM_29bd07d0480e4b41a

Is authenticated: True

Authentication Type: NTLM

Thread account name: NT AUTHORITY\SYSTEM

Thread information:

Thread ID: 18

Thread account name: NT AUTHORITY\SYSTEM

Is impersonating: False

Stack trace: at Microsoft.Exchange.HttpProxy.ProxyRequestHandler.EndProcessRequest(IAsyncResult result)

at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)

I have spent hours wading through log files and posts, and cannot get my head around this one.

↧

Exchange 2013 not installing, gives error message that sp3 needs to be applied to exchange 2010

January 17, 2015, 10:36 pm

≫ Next: Mailbox migration failed: MapiExceptionJetErrorPageNotInitialized: Unable to find table row

≪ Previous: Unable to access ECP/OWA

While trying to install Exchange 2013, it gives an error that sp3 needs to be applied to exchange 2010. There are no exchange 2010 servers on the network, the one the existed on a mail server was formatted along with the server. I have tried removing all the orphaned objects in AD without success. I have tried ADSI EDIT there are no containers containing exchange. How do i get exchage out of AD in order to proceed with the installation of exchange 2013.

↧

Mailbox migration failed: MapiExceptionJetErrorPageNotInitialized: Unable to find table row

January 13, 2015, 11:08 am

≫ Next: Exchange 2007 to 2013 Public Folder Migration test user doesn't connect to 2013 folders

≪ Previous: Exchange 2013 not installing, gives error message that sp3 needs to be applied to exchange 2010

Hi Everyone,

I'm trying to migrate mailboxes from 2010 -> 2013 and I've com across an odd error.

I've put my skip limit to 5(for bad files), however this error seems to appear regardless. I'm not a Jets DB expert, but not being able to find a row seems quite serious. Any ideas?

Data migrated: 1004 MB (1,052,931,906 bytes)
Migration rate: 0 B (0 bytes)
Error: MigrationPermanentException: Error: MapiExceptionJetErrorPageNotInitialized: Unable to find table row. (hr=0x80004005, ec=-1019) Diagnostic context: ...... Lid: 52176 ClientVersion: 15.0.516.30 Lid: 50032 ServerVersion: 14.3.123.2 Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropGetContentsTable [5] Lid: 27962 ROP: ropSetColumns [18] Lid: 17082 ROP Error: 0xFFFFFC05 Lid: 27489 Lid: 21921 StoreEc: 0xFFFFFC05 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 1238 Remote Context Overflow Lid: 8756 StoreEc: 0xFFFFFC05 Lid: 58765 StoreEc: 0xFFFFFC05 Lid: 48425 StoreEc: 0xFFFFFC05 Lid: 6995 StoreEc: 0xFFFFFC05 PropTag: 0x67B50102 Lid: 4819 StoreEc: 0xFFFFFC05 Lid: 17692 Lid: 5587 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 13300 StoreEc: 0xFFFFFC05 Lid: 21097 Lid: 39027 dwParam: 0x6BD Lid: 8756 StoreEc: 0xFFFFFC05 Lid: 58765 StoreEc: 0xFFFFFC05 Lid: 48425 StoreEc: 0xFFFFFC05 Lid: 5459 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 6483 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 59073 StoreEc: 0xFFFFFC05 Lid: 28220 Lid: 52321 StoreEc: 0xFFFFFC05 Lid: 46177 dwParam: 0xBFE629 Lid: 35937 StoreEc: 0xFFFFFC05 Lid: 44129 dwParam: 0x1183C6F Lid: 60513 StoreEc: 0xFFFFFC05 Lid: 48225 Lid: 9253 StoreEc: 0xFFFFFC05 Lid: 28104 Lid: 13861 StoreEc: 0xFFFFFC05 Lid: 27265 StoreEc: 0xFFFFFC05 Lid: 1750 ---- Remote Context End ---- Lid: 27962 ROP: ropFindRow [79] Lid: 17082 ROP Error: 0xFFFFFC05 Lid: 23649 Lid: 21921 StoreEc: 0xFFFFFC05 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 26426 ROP: ropFindRow [79] Lid: 40685 StoreEc: 0xFFFFFC05 Lid: 28720 Lid: 11621 StoreEc: 0xFFFFFC05 Lid: 56781 StoreEc: 0xFFFFFC05 Lid: 21484 Lid: 23788 StoreEc: 0xFFFFFC05 Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0xFFFFFC05 Lid: 29726 Lid: 18462 StoreEc: 0xFFFFFC05

↧

Exchange 2007 to 2013 Public Folder Migration test user doesn't connect to 2013 folders

January 11, 2015, 12:08 pm

≫ Next: EAC will not let you log in after first install of Exchange 2013 in a 2010 environment

≪ Previous: Mailbox migration failed: MapiExceptionJetErrorPageNotInitialized: Unable to find table row

The basic symptom is this: The PF migration appears to work perfectly but when trying to assign a user to test the new folders it still attempts to connect to the old folders even though the users's DefaultPublicFolderMailbox is set to the new server. Connection status in Outlook still shows a connection to the 2007 server.

I'm using the TechNet PF migration article: http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx

This is a single server migration from 2007 SP3 UR10 to 2013 CU5 Standard. The migration of mailboxes is complete with no errors and I'm trying to move the 100mb in public folders over to the 2013 server. Using several guides but once I've had problems I've switched to using the "standard" TechNet article as follows. I am creating only one PF mailbox since there are 10 folders and 100mb in data roughly. My Mailboxmap.csv file shows only the following:

"TargetMailbox","FolderPath"
"PFRoot","\"

The entire PF migration steps work flawlessly with no errors that I can see at all. I've rolled back and ran this process a half dozen times now to see if I've missed something.

I'm stuck on Step 8: Item #2 testing the migration from the test user in Outlook.

I've assigned the DefaultPublicFolderMailbox properties as that Item #2 shows me to do and if I use Get-Mailbox (test user) | Select DefaultPublicFolderMailbox command I see the new PFRoot mailbox listed as the default. However, the test user can't access the public folders at all. If I look in EAC I still see no public folders listed at all. If I use this guide:

http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part2.html

It shows after setting "Set-Mailbox PFRoot -PublicFolder -IsExcludedFromServingHierarchy $False" I should be able to see the public folders in EAC. However, I can see the PF mailbox (PFRoot) but no public folders at all in EAC.

Where do I go from here? Even though I have no errors I don't want to complete the migration because the test isn't working.

Jeremy Regehr

↧

EAC will not let you log in after first install of Exchange 2013 in a 2010 environment

January 14, 2015, 2:08 pm

≫ Next: Exchange Online users logging into OWA On Premises.

≪ Previous: Exchange 2007 to 2013 Public Folder Migration test user doesn't connect to 2013 folders

Good day all. We have installed Exchange 2013 into our single server 2010 environment. After a successful install I am not able to log onto the 2013 EAC. I know that since my mailbox is still on 2010 that I should not see EAC unless I use the

https://server/ecp/?ExchClientVer=15 but this does not work either.

I opened a case with MS on this and got a response but I am confused as to one part of the instructions. I replied to the engineer but she is offline for a few hours and I wanted to drop the instructions here and see if you know what it is that she is stating.

Question that I need answered: Below, at step 4 she left a note "Please run above command with your production install directory script". What you think this line means? Run this script from the provided scripts that came with 2010? Grab the script from 2013 files and run it on the 2010 server? or run this script on the 2013 server?

Thanks in advance!

Action Plan
=========
1. Recreate the ECP virtual directories on exchange 2013 server with the following commands (Run as Administrator) on EMS:

Remove-EcpVirtualDirectory -Identity "Server2013\ecp (Default Web Site)”

New-EcpVirtualDirectory -Server Server2013 -InternalURL https://Server2013.domain.com/ecp

Set-ECPVirtualDirectory -Identity "Server2013\ecp (Default Web Site)” -AdminEnabled $True

2. Recycle MSExchangeOwaAppPool under IIS, Application Pools.

3. Ran "iisreset" on EMS.

4. Ran the "UpdateCAS.ps1" powershell script from the Exchange install directory scripts subfolder. The command example is as follows:

C:\Program Files\Microsoft\Exchange Server\V15\Bin>.\UpdateCas.ps1

Note: Please run above command with your production install directory script.

5. Open the IIS manager, find the Exchange Back End site, double-click Authentication on the right “/ecp Home” page. Point to Windows Authentication after launching Authentication windows. Right-click windows authentication, point to Providers. Make sure Negotiate and NTLM under Enabled Providers. You can refer to the related screenshot from my test environment as below:

6. Then re-run "iisreset" EMS.
=========

↧

Exchange Online users logging into OWA On Premises.

January 15, 2015, 5:21 pm

≫ Next: Migration Planning: What will happen with clients when changing namespace?

≪ Previous: EAC will not let you log in after first install of Exchange 2013 in a 2010 environment

Greetings!

We are implementing hybrid Exchange Online with Exchange 2013, and we face the following situation:

When an Exchange Online user tries to access through OWA on-premises, a page appears with a link to the Exchange Online OWA.

Is it supposed to be this way?

Why the redirection is not automatic?

Seems so obvious that the redirect should be automatic that if it is to be this way (the user having to click the link), there must be some technical justification. Can anyone refer me some article about it? For to convince the top brass of the company here that it has to be like that!

Thanks in advance !!!

Fabio Martins MCDST/MCSA Brasil!!!

↧

Migration Planning: What will happen with clients when changing namespace?

January 12, 2015, 12:36 am

≫ Next: PST Capture 2.0 - Mailboxes

≪ Previous: Exchange Online users logging into OWA On Premises.

Hello,

We are planning to upgrade our EX2010 enviroment to EX2013.

Sadly our namespace in EX2010 is right now owa2.domain.com. The name owa2 is coming from last migration between ex2003 and ex2010. I'd like to remove this minor flaw if possible.

But what will happen with all the clients and mobile devices which are right now bound to owa2.domain.com? Is it possible to change the name back to owa.domain.com without manual interaction with the clients?

Kind Regards

↧

PST Capture 2.0 - Mailboxes

January 13, 2015, 7:26 pm

≫ Next: Internal and External Names

≪ Previous: Migration Planning: What will happen with clients when changing namespace?

Hello,

I have been trying to troubleshoot why PST Capture 2.0 will not show all of the mailboxes from my Office 365 environment (Exchange Online).

I am using a global administrator (Who is allowed for the Organization Management role) in the connection settings and have used the following for the server settings:

smtp.office365.com

smtp.outlook.com

outlook.office365.com

pod#####.outlook.com

however when I used the pod url I was able to view all 50+ mailboxes for about 10 seconds before it only showed roughly 10 mailboxes. However because the pod url changes it is not reliable. Is there anyway for me to force PST Capture to show all of the mailboxes that it finds?

↧

Internal and External Names

January 18, 2015, 8:15 pm

≫ Next: Exchange Server 2013 CU7 Installation Issue

≪ Previous: PST Capture 2.0 - Mailboxes

I am doing my first Exchange 2013 install. Small client, single server, approx. 100 users. I am going through the deployment guide and have a few questions.

For prior versions, the only names I've had to obtain for the certificate were mail.domain.com and autodiscover.domain.com but it appears that the guide is telling me to get mail.domain.com for Outlook Anywhere, OAB, Remote Powershell, EWS and ActiveSync, and get owa.domain.com for Outlook Web App and ECP. Is that the case and is it required?

I may be jumping into this install a bit prematurely but thought I'd give it a try since it should be a pretty straightforward installation.

A little clarification on this would be greatly appreciated.

Thank you.

↧

Exchange Server 2013 CU7 Installation Issue

January 8, 2015, 12:24 pm

≫ Next: Exchange 2013 on-premises doesn't see Exchange Online profile pictures

≪ Previous: Internal and External Names

Error:
The following error was generated when "$error.Clear();
            if ($RoleProductPlatform -eq "amd64")
            {
                try
                {
                    # Need to configure the ETL traces before the fast service is installed. This will ensure that when the service comes up
                    # it will have the necessary trace session setting available to read from the registry
                    $fastPerfEtlTraceFolderPath = Join-Path -Path $RoleBinPath -ChildPath "\Search\Ceres\Diagnostics\ETLTraces"
                    $fastDiagnosticTracingRegKeyPath = 'HKLM:\SOFTWARE\Microsoft\Office Server\16.0\Search\Diagnostics\Tracing'
                    if(-not(Test-Path -Path $fastPerfEtlTraceFolderPath))
                    {
                        $null = New-Item $fastPerfEtlTraceFolderPath -Type 'Directory' -Force
                    }

                    if (-not(Test-Path -Path $fastDiagnosticTracingRegKeyPath))
                    {
                        $null = New-Item -Path $fastDiagnosticTracingRegKeyPath -Force
                    }

                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'TracingPath' -PropertyType 'string' -Value $fastPerfEtlTraceFolderPath -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'TracingFileName' -PropertyType 'string' -Value 'DocumentProcessingTrace' -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'DocumentParserSuccessLogMessage' -PropertyType 'Dword' -Value 1 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'DocumentParserLoggingNoInitialisation' -PropertyType 'Dword' -Value 1 -Force

                    # Max trace folder size 50 * 100 = 5GB
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'MaxTraceFileSize' -PropertyType 'Dword' -Value 50 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'MaxTraceFileCount' -PropertyType 'Dword' -Value 100 -Force

                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'UseGeneralSwitch' -PropertyType 'Dword' -Value 1 -Force
                    $null = New-ItemProperty -Path $fastDiagnosticTracingRegKeyPath -Name 'GeneralSwitch' -PropertyType 'Dword' -Value 1 -Force
                }
                catch
                {
                    # ETl tracing is not critical. Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while trying to Configure the FAST ETL traces. Exception: " + $_.Exception.Message);
                }

                try
                {
                    $fastFusionRegKeyPath = 'HKLM:\SOFTWARE\Microsoft\Office Server\16.0\Search\FlightControl'

                    if (Test-Path -Path $fastFusionRegKeyPath)
                    {
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_new_enabled' -Force -ErrorAction SilentlyContinue
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_old_enabled' -Force -ErrorAction SilentlyContinue
                        Remove-ItemProperty -Path $fastFusionRegKeyPath -Name 'fusion_compare_outputs' -Force -ErrorAction SilentlyContinue
                    }
                }
                catch
                {
                    # Removing new fusion keys is not critical. Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while trying to remove the fast new fusion reg keys. Exception: " + $_.Exception.Message);
                }

                $fastInstallConfigPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\Installer";
                $command = Join-Path -Path $fastInstallConfigPath -ChildPath "InstallConfig.ps1";
                $dataFolderPath = Join-Path -Path $RoleBinPath -ChildPath "Search\Ceres\HostController\Data";

                # Remove previous SearchFoundation configuration
                &$command -action u -silent;
                try
                {
                    if ([System.IO.Directory]::Exists($dataFolderPath))
                    {
                        [System.IO.Directory]::Delete($dataFolderPath, $true);
                    }
                }
                catch
                {
                    $deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath + " - " + $_.Exception.Message;
                    Write-ExchangeSetupLog -Error $deleteErrorMsg;
                }

                # Re-add the SearchFoundation configuration
                try
                {
                    # the BasePort value MUST be kept in sync with dev\Search\src\OperatorSchema\SearchConfig.cs
                    &$command -action i -baseport 3800 -dataFolder $dataFolderPath -silent;
                }
                catch
                {
                    $errorMsg = "Failure configuring SearchFoundation through installconfig.ps1 - " + $_.Exception.Message;
                    Write-ExchangeSetupLog -Error $errorMsg;

                    # Clean up the failed configuration attempt.
                    &$command -action u -silent;
                    try
                    {
                        if ([System.IO.Directory]::Exists($dataFolderPath))
                        {
                            [System.IO.Directory]::Delete($dataFolderPath, $true);
                        }
                    }
                    catch
                    {
                        $deleteErrorMsg = "Failure cleaning up SearchFoundation Data folder. - " + $dataFolderPath + " - " + $_.Exception.Message;
                        Write-ExchangeSetupLog -Error $deleteErrorMsg;
                    }
                }

                # Set the PowerShell Snap-in's public key tokens
                try
                {
                    $PowerShellSnapinsPath = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\PowerShellSnapIns\";
                    $FastSnapinNames = @("EnginePSSnapin", "HostControllerPSSnapIn", "InteractionEnginePSSnapIn", "JunoPSSnapin","SearchCorePSSnapIn");
                    $officePublicKey = "71E9BCE111E9429C";
                    $exchangePublicKey = "31bf3856ad364e35";
                    foreach ($fastSnapinName in $FastSnapinNames)
                    {
                        $fastSnapinPath = $PowerShellSnapinsPath + $fastSnapinName;
                        $assemblyNameProperty = Get-ItemProperty -Path $fastSnapinPath -Name "AssemblyName" -ErrorAction SilentlyContinue;
                        if ($assemblyNameProperty -ne $null -and (-not [string]::IsNullOrEmpty($assemblyNameProperty.AssemblyName)))
                        {
                            $newAssemblyName = $assemblyNameProperty.AssemblyName -ireplace ($officePublicKey, $exchangePublicKey);
                            Set-ItemProperty -Path $fastSnapinPath -Name "AssemblyName" -Value $newAssemblyName;
                        }
                    }
                }
                catch
                {
                    # Info only log
                    Write-ExchangeSetupLog -Info ("An exception ocurred while configuring Search Foundation PowerShell Snapin. Exception: " + $_.Exception.Message);
                }
            }
        " was run: "System.Exception: Failure configuring SearchFoundation through installconfig.ps1 - Error occurred while configuring Search Foundation for Exchange.System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://exchange.domain.com:3803/Management/InteractionEngine. The connection attempt lasted for a time span of 00:00:02.0470060. TCP error code 10061: No connection could be made because the target machine actively refused it 192.168.0.0:3803. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 192.168.0.0:3803
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---

Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)

Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.Ceres.CoreServices.Admin.INodeOperationsManagementAgent.AddNamedNode(String node)
   at Microsoft.Ceres.Exchange.PostSetup.NodeManager.DeployInterationEngineNode()
   at Microsoft.Ceres.Exchange.PostSetup.DeploymentManager.Install(String installDirectory, String dataDirectoryPath, Int32 basePort, String logFile, Boolean singleNode, String systemName, Boolean attachedMode)
   at CallSite.Target(Closure , CallSite , RuntimeType , Object , Object , Object , Object , Object , Object , Boolean )
   at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.WriteExchangeSetupLog.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

↧

Exchange 2013 on-premises doesn't see Exchange Online profile pictures

January 19, 2015, 1:44 am

≫ Next: SSL Offloading after a CU Update - Exchange 2013

≪ Previous: Exchange Server 2013 CU7 Installation Issue

Hello!

We are on an hybrid deployment with some users on Exchange 2013 on-premises and others on Exchange Online (Office 365 E3 plan). We have enabled photo sync (PhotosEnabled attribute) in the organization relationship, both on-premises and online, but while Exchange Online users can see all profile pictures, Exchange on-premises can see only on-premises pictures.

It also looks like that online users can see only a low resolution version of on-premises users' pictures.

Do you have any idea how to troubleshoot or fix this, please?

Thanks!

↧

SSL Offloading after a CU Update - Exchange 2013

January 9, 2015, 6:23 am

≫ Next: Event ID 106, Event ID 1039

≪ Previous: Exchange 2013 on-premises doesn't see Exchange Online profile pictures

We started off our Exchange 2013 environment by building it on CU5. We currently use SSL offloading in conjunction with our load balancer.

We plan on starting to update our environment to CU7 starting tomorrow, and wanted to confirm with somebody who has applied CU's with SSL offloading.

According to this in the first paragraph, you must reconfigure SSL offloading after you apply a CU update:

http://technet.microsoft.com/en-us/library/dn635115(v=exchg.150).aspx

Can somebody confirm this is the case? Even if you do the setup.exe /upgrade command line switch?

Any issues setting it back up with the same commands we set it up with originally? Just wanting to know if there are any gotcha's we should look at for.

From my reading, this would be the only thing we would have to set up back up if it's true. I really hope it doesn't reset any other settings after the upgrade.

↧

Event ID 106, Event ID 1039

January 13, 2015, 12:22 pm

≫ Next: Updates failing error code - 80072EFD

≪ Previous: SSL Offloading after a CU Update - Exchange 2013

Hi!

I have a clean installed ex2013 server (OS Windows Server 2012r2) and an existing ex2010 server. I intstalled ex2013sp1, after update to CU7. Every time when I reboot the new exchanger I'm getting six error in the application log (Event ID 106 and 1039). The error message language is english and hungarian. I read many articles, but i can't find solution. Is anybody there who has the same issue?

Performance counter updating error. Counter name is Count Matched LowFidelity FingerPrint, but missed HighFidelity FingerPrint, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

568 csrss

960 svchost

1352 hostcontrollerservice

5192 MSExchangeThrottling

1708 MSExchangeHMHost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

4080 MSExchangeFrontendTransport

2880 taskhost

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

4452 MSExchangeMailboxReplication

900 dwm

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

0 Idle

Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Anti-Malware Datacenter Perfcounters : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange anti-malware datacenter perfcounters. Error Details: 2

a következő helyen: Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Performance counter updating error. Counter name is Number of items, item is matched with finger printing cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

568 csrss

960 svchost

1352 hostcontrollerservice

5192 MSExchangeThrottling

1708 MSExchangeHMHost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

4080 MSExchangeFrontendTransport

2880 taskhost

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

4452 MSExchangeMailboxReplication

900 dwm

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

0 Idle

a következő helyen: Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Performance counter updating error. Counter name is Number of items in Malware Fingerprint cache, category name is MSExchange Anti-Malware Datacenter Perfcounters. Optional code: 3. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.set_RawValue(Int64 value)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.set_RawValue(Int64 value)

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

568 csrss

960 svchost

1352 hostcontrollerservice

5192 MSExchangeThrottling

1708 MSExchangeHMHost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

4080 MSExchangeFrontendTransport

2880 taskhost

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

4452 MSExchangeMailboxReplication

900 dwm

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

0 Idle

a következő helyen: Microsoft.Exchange.Diagnostics.FileMapping.OpenFileMapping(String name, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)

Performance counter updating error. Counter name is Current Requests Pending, category name is MSExchange LiveIdBasicAuthentication. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: A kért teljesítményszámláló nem egyéni számláló, ezért ReadOnly módúként kell inicializálni.

a következő helyen: System.Diagnostics.PerformanceCounter.InitializeImpl()

a következő helyen: System.Diagnostics.PerformanceCounter.get_RawValue()

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()

Last worker process info : System.ArgumentException: Nem fut 5428 azonosítójú folyamat.

a következő helyen: System.Diagnostics.Process.GetProcessById(Int32 processId)

a következő helyen: Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()

Processes running while Performance counter failed to update:

3544 WmiPrvSE

1376 MSExchangeDelivery

7676 svchost

2696 SMSvcHost

6768 EdgeTransport

576 wininit

1560 updateservice

4908 scanningprocess

2148 WMSvc

7992 w3wp

7452 WmiApSrv

568 csrss

960 svchost

1352 hostcontrollerservice

7852 WmiPrvSE

5192 MSExchangeThrottling

1708 MSExchangeHMHost

8824 svchost

872 LogonUI

2712 noderunner

2120 svchost

740 svchost

6120 Microsoft.Exchange.UM.CallRouter

772 svchost

932 svchost

7432 FSCConfigurationServer

4080 MSExchangeFrontendTransport

4668 Microsoft.Exchange.RpcClientAccess.Service

4272 MSExchangeMailboxAssistants

2104 svchost

6240 UMWorkerProcess

4860 scanningprocess

916 svchost

5052 MSExchangeSubmission

9188 w3wp

7832 VSSVC

5640 Microsoft.Exchange.Store.Worker

516 svchost

3864 Microsoft.Exchange.EdgeSyncSvc

8272 rundll32

4452 MSExchangeMailboxReplication

900 dwm

7596 TiWorker

3256 noderunner

6256 WmiPrvSE

1676 sftracing

2264 Microsoft.Exchange.Directory.TopologyService

1276 fms

880 svchost

464 svchost

9940 w3wp

8608 w3wp

5604 umservice

512 csrss

1836 SMSvcHost

3432 noderunner

6780 conhost

672 lsass

6580 MSExchangeTransport

1456 inetinfo

7604 svchost

664 services

1252 svchost

4792 Microsoft.Exchange.ServiceHost

2624 MSExchangeDagMgmt

1476 Microsoft.Exchange.Diagnostics.Service

4584 msexchangerepl

3204 noderunner

6552 rundll32

6744 TrustedInstaller

4180 Microsoft.Exchange.Store.Service

1812 mqsvc

3976 Microsoft.Exchange.Search.Service

3776 conhost

1608 ForefrontActiveDirectoryConnector

8152 sppsvc

1212 spoolsv

1604 Microsoft.Exchange.AntispamUpdateSvc

9280 w3wp

4748 scanningprocess

3760 MSExchangeHMWorker

408 smss

604 winlogon

5300 MSExchangeTransportLogSearch

4 System

7556 svchost

0 Idle

Performance Counters Layout information: FileMappingNotFoundException for category MSExchange LiveIdBasicAuthentication : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange liveidbasicauthentication. Error Details: 2