Quantcast
Channel: Exchange Server 2013 - Setup, Deployment, Updates, and Migration 论坛
Viewing all 7008 articles
Browse latest View live
↧

Failed Exchange 2013 setup - catch 22 situation

June 26, 2014, 1:32 am
$
0
0
Dear all,

Trying to install a new Exchange 2013 server here.

Launched the GUI setup, went through the various pre-requisites and launched into the meat of the matter. It seemed to work fine until I got  failure in the HubTransportRole.

Now I have an incomplete install.  Setup will not run in "normal" mode, instructing me to run in /m:RecoverServer mode. That generates two new errors:

[06.26.2014 07:39:36.0559] [1] [REQUIRED] The language pack bundle could not be found or is corrupt.                                
No idea where this is coming from - it's the very same server that passed pre-requisite checks a few minutes ago...

[06.26.2014 07:39:36.0569] [1] [REQUIRED] A Setup failure previously occurred while installing the HubTransportRole role. Either run Setup again for just this role, or remove the role using Control Panel.

Well that's what I am trying to recover from... I can't run setup to remove this role as it instructs me to use RecoverServer, yet RecoverServer instructs me to use normal setup... A bit of a catch22.

This is Exchange 2013sp1 on Server 2012R2.

Any suggestion / pointer most welcome
↧
Search

Lotus Notes to Exchange 2013 Migration

March 10, 2015, 1:17 am
$
0
0

Hello,

I need the migration procedure from Lotus Notes to Exchange 2013.

1. How can i migrate Lotus Notes mail data to Exchange server 2013?

2. Is there any direct migration available?

3. for Mail data how can i migrate to exchange?

4. If any tools required please give suggest.

Please suggest.

Thanks

↧
↧

Exchange says my environment is not 2003 native

April 28, 2015, 12:30 pm
$
0
0

Good day,

I am trying to install Exchange 2013 onto a server 2012 R2 in a 2008 forest level environment. During the installation process after the prerequisite analysis it errors out with this.

Error:

The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.

I have confirmed my forest level is running at 2008 native. Any ideas?

↧

exchange server 2007 still on version 8.1 even after applying sp3

April 25, 2015, 11:24 pm
$
0
0

hello,

I have exchange 2007 version 8.1 and I want to migrate to exchange 2013, so in order to to that I need to upgrade the exchange 2007 to sp3.

I install the sp3 without any issue but the version of the exchange 2007 still 8.1, I try to re install but it show that the sp3 already installed.

any idea about this issue?

thank you

↧

how to manually moving routing group connector from the failed routing master to the second exchange server

April 28, 2015, 8:47 pm
$
0
0

dear All

I am having a problem with incoming emails after the below scenario

1. the first  exchange server was installed in the forest, and due to the AD replication problems Exchange server was failing to connect. then this Exchange server was taken out of the domain without disabling the services.

2. After resolving the Replication problem in AD, the first exchange server could not start the services.

3. I have now deployed a second Exchange server in the forest and running fine BUT cannot receive emails with error Authentication rejected by the smtp server.

4. Tried to normally uninstall the first exchange server, but giving error the stop the uninstallation.

5.NOW I want to manually remove this first exchange server and transfer the routing group connector to the second Exchange server.

IF NEED MORE CLARIFICATION ON THE PROBLEM PLEASE let me know 

Your usual help is greatly appreciated in advance.

Regards

Michael 

↧
↧

Backup ArcServe Exchange 2013 Document Level

January 28, 2015, 5:59 pm
$
0
0

We are in an hybrid environment of Exchange OnPremises and Exchange Online and in the OnPremises environment we have cohexistence of Exchange 2010 and Exchange 2013. 

As a backup solution we have CA Arcserve Backup, that allow us to make a backup in document level of the exchange 2013 mailboxes. 

We still can´t do the backup document level. In the logs files from the ca agent installed in the server, we found some MAPI errors. 

We followed all the articles bellow, but without success. 

We had a remote support from CA and they told us that we are facing a problem on the Exchange Server. 

We ran the Test-MapiConectivity that returns Success.

Below of the links, follow the logs, if someone could help-me to diagose the MAPI on Exchange 2013, I will be vary glad. 

http://www.arcserve-knowledgebase.com/index.php?View=pdf&EntryID=4969

https://arcserve.zendesk.com/hc/en-us/articles/201992659-Exchange-2013-Document-Level-Backup-fails-to-backup-n-mailboxes-Error-AE9609-A-necessary-Exchange-service-is-not-running-Please-start-the-related-service-on-the-Exchange-server-manually-

http://www.arcserve-knowledgebase.com/index.php?View=entry&EntryID=5481

https://arcserve.zendesk.com/hc/en-us/articles/202153889-AE9609-AE9603-AW9627-ErrErr-800000008004011d

https://communities.ca.com/thread/241692506

https://communities.ca.com/thread/241690757 

http://arcserve-knowledgebase.com/index.php?View=entry&EntryID=2

http://arcserve-knowledgebase.com/index.php?View=entry&EntryID=1193

http://arcserve-knowledgebase.com/index.php?View=entry&EntryID=2522

http://arcserve-knowledgebase.com/index.php?View=pdf&EntryID=4600

https://arcserve.zendesk.com/hc/pt-br/requests/10740

<01/28/2015-17:36:16:852 TID:20ac>Begin MAPILogonEx() failed MAPICODE: 0 
<01/28/2015-17:36:16:992 TID:20ac>End MAPILogonEx() failed MAPICODE: 0 
<01/28/2015-17:36:17:08 TID:20ac>After  MAPILogonEx() before call my failed MAPICODE: 0 

<01/28/2015-17:36:17:164 TID:20ac>[MAPISIS ERROR] OpenMsgStore() failed  The information store could not be opened. Err:8000000080040111
<01/28/2015-17:36:17:164 TID:20ac>[MAPISIS ERROR] OpenStoreAndTable failed
<01/28/2015-17:36:17:164 TID:20ac>[DBAEXSIS ERROR] CBrowse::GetExch2000Mailboxes() GetMailboxLegacyDNBuffersize() failed

Thanks in advance!

Fabio Martins MCDST/MCSA Brasil!!!

Fabio Martins MCDST/MCSA Brasil!!!

↧

"Sent" time showing on draft emails on Exch2013. Not when user moved to Exch 2010

April 29, 2015, 6:45 am
$
0
0

Hi,

We have both Exchange 2010 and Exchange 2013 running in co-existence.

Exchange 2010, version 14.3 (build 123.4)
Exchange 2013, version 15.0 (build 913.22)

We finished migrating all users to Exchange 2013 some while back. All PF's are migrated too. Nothing is left running on Exchange 2010 and we were all ready to decommission this server.

Then some users started calling saying when they draft an email and save it without sending, they notice the draft will show a sent time in Outlook under the 'Sent' column. I can easily replicate this behavior. 

So, I went to the Exchange 2010 server, created a new user and mailbox, logged into a PC and started Outlook. I created a few draft emails and under the 'Sent' column they show as "none". I then migrate the mailbox to Exchange 2013 and repeated the steps. I immediately get a sent time appear when closing and saving the draft item. The messages created whilst on Exchange 2010 remain untouched in my drafts with a sent time as "none". What is causing this?

When I migrate the mailbox back to Exch 2010 the issue goes away - new drafts appear with a sent time of "none", as expected.

What is causing this problem with Exchange 2013?

I am using Outlook 2010 14.0.7147.5001 with all non-MS add-ins removed. The issue on Exch 2013 happens when using OWA as well, so the type of client appears irrelevant to this issue.

Many thanks.

↧

Unable to see additional owa and ecp configuration from ECP

April 29, 2015, 7:45 am
$
0
0


Hello guys,

I have created additional OWA and ECP virtual directories for FBA usage. IIS is configured with additional web site on which these directories stored ( as virtual folders). Bindings for this site are restricted for NIC which is configured on related servers as secondary ( without default gateway configured and checklist to be published on DNS).

I have configured settings for these OWA and ECP using PowerShell. They work fine without any problem..... Users can login OWA, but....

When I open Exchange Control Panel , go to servers, virtual directories and click on these additional OWA and ECP, I am getting 500 Unexpected Error on the right pane or on the popup if double clicked. That means that I can do changes only using PowerShell.

Any ideas regarding this problem?


↧
Search

Good way to export those Outlook Rules from Exchange 2007 to Exchange 2013

April 29, 2015, 7:47 am
$
0
0

Dear All ,

Currently i'm  doing a cross forest migration from Exchange 2007 to Exchange 2013 

There are almost 7000 users in the 2007 environment who has plenty of rules in their outlook and this customer is much concerned about these outlook rules during this migration. He wants to make a bulk export and import of these rules.

Is there any good way through Powershell to export all these outlook  rules and import these rules in Exchange 2013 

Can i achieve something with Get-InboxRule  if its supported in Exchange 2007 ?

I can  list out all the existing rules in Exchange 2013 environment but i have a doubt that  if this command is supported in Exchange 2007 ?

$mbx = Get-Mailbox; $mbx | Foreach { Get-InboxRule -Mailbox $_.DistinguishedName }

Any help is much appreciated.

Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish (MVP)

↧
↧

Issues after Exchange CU8

April 21, 2015, 8:20 am
$
0
0
Updating a client's mail server from CU7 to CU8 and an error at the end involving access denied to a certain folder caused a failure and we had to restore a backup and run the update again, this time it was successful. When we looked later we noticed that several of the folders under c:\program files\microsoft\exchange\v15\clientaccess have no owners now. We can manually set the ownership, but is this intentional?
↧

ActiveSyncCTPMonitor probe unhealthy, along with a few others

January 21, 2015, 8:22 pm
$
0
0

Exchange 2013 is up and running (still in test mode) and I can process mail with POP, IMAP, Outlook Anywhere, and activesync (with my cellphone and tablet). Event logs are pretty normal except for the ProbeResult log. I see errors in there for ActiveSync, IMAP and POP and some others. I ran the get-serverhealth cmdlet and then followed the instructions in the knowledgebase articles to reset stuff in IIS.  I am at a loss what else to do. Everything seems to be working fine but I see those errors. (Maybe I shouldn't have looked in that log :)

Any suggestions? Thanks,

Lou

↧

This database can be overwritten by a restore (AllowFileRestore)

July 4, 2013, 8:40 am
$
0
0

Hello

in Exchange 2013 CU1 when i activate option of Database can be overwritten by a restore then i restart the information store or the server, this option will return inactivated.

anybody face the same problem? and is this error is a bug?

↧

Exchange 2013 installation doesn't create default web site virtual directories, ecp not accessible

April 29, 2015, 3:50 am
$
0
0

Hi to all, I've a very strange problem with my fresh installation of exchange 2013 sp1. After some strange problems due to a dirty AD that contained an old 2010 installation,  I've cleaned it with adsiedit and been able to install my exchange 2013. All installation gone fine, the structure is

2 DC 2008 R2

1 2012 R2 member server with Ex2013 on it

I restarted the machine and checked if services are ok: all started correctly.

The problem is this...I'm unable to open ECP console\webpage...page not found...also OWA..same issue...so I've checked the IIS configuration...i find that..Default Web Site is quite CLEAN! no ews, no owa, no ecp dir...instead of Exchange Backend site is pupulated with right vdir...why happened this? 

How can I recreate them? I'm trying to update with CU 8 and it's installing fine...but if at the end I still not able to access my console...I don't know what in can do of different...

Thank you for suggestions...

Gian

↧
↧

Service Connection Point Configuration Exchange 2013

April 29, 2015, 11:41 am
$
0
0

Before we get to the SCP, do you change DNS entries from the internet before we do SCP?

After all this is done the last step would be to move the mailboxes?

I'm at the point of configuring my SCP and I ran a script to see what each autodiscoverserviceinternalURI is.
                              On Exchange 2010 its using the outside URL that I connect to for other services such as https://mail.domain.com/autodiscover/autodiscover.xml
                              On Exchange 2013 its using an INTERNAL URL: https://server.domain.local/autodiscover/autodiscover.xml

Should the URI be for both servers

Name                           : Exchange 2010 (Current Setting)
AutoDiscoverServiceInternalUri : https://mail.domain.com/autodiscover/autodiscover.xml

Name                           : Exchange 2013
AutoDiscoverServiceInternalUri : https://mail.domain.com/Autodiscover/Autodiscover.xml

 
↧

Exchange 2007 to 2013 Migration timimg

April 29, 2015, 8:22 am
$
0
0

I am preparing for an Exchange 2007 to 2013 Migration. I wanted to stand the servers up and not yet point to them.

I learned the hard way the once you install the CAS role, it inserts itself into AD and clients will attempt to connect to it right away. I had not yet changed the DNS and added the legacy DNS record.  I received various pop ups about the names on the security certificate not matching  the name of the site. I ended up uninstalling the CAS servers.

What I want to know is, once I re-install the CAS role, do I have to cut over all the URLs and DNS right away? It appears so.  If so, I will want to plan this for weekend.

↧
Search

Public folder migration cannot complete due to StalledDueToMailboxLock status

May 3, 2013, 11:12 pm
$
0
0

I'm on one of my last steps in migrating from 2010 to 2013.  When I issue the command to  Resume the migration request after the Autosuspend happens, I get a StalledDueToMailBoxLock, and it retries but never completes.  I've removed the request and tried it again, but I get the same thing.  The requests were 24 hours apart.  I have no clients that are connecting to the 2010 server anymore, and all the user mailboxes have been migrated to 2013 successfully.  I haven't found much online about this status, so I'm at a loss.  By the way, this is during my Public Folder migration process.  Sorry for leaving that out.

Thank you.


↧

CU upgrade error; [ERROR] Save() is not supported on a read-only object.

March 19, 2015, 1:36 am
$
0
0

Hi All,

When we try to update or Exchange 2013 CU3 environment to CU7 we get some errors when we try to prepare ad.

It fails at 98% with an error:

[2] [ERROR] Save() is not supported on a read-only object.
[2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Save() is not supported on a read-only object.

We have checked all the security settings with our test environment where it is working. Running command prompt as an admin and we have all necessary domain rights. Also checked alle the objects with Adsi edit, but no difference with our test environment.

Exchange error log:

[03/18/2015 20:17:47.0096] [2] Used domain controller <FQDN> to read object CN=Exchange Servers,OU=Microsoft Exchange Security Groups,DC=prod,DC=local.
[03/18/2015 20:17:47.0096] [2] Used domain controller <FQDN> to read object CN=Exchange Servers,OU=Microsoft Exchange Security Groups,DC=prod,DC=local.
[03/18/2015 20:17:47.0096] [2] [ERROR] Save() is not supported on a read-only object.
[03/18/2015 20:17:47.0096] [2] [WARNING] An unexpected error has occurred and a Watson dump is being generated: Save() is not supported on a read-only object.
[03/18/2015 20:17:47.0962] [1] The following 1 error(s) occurred during task execution:
[03/18/2015 20:17:47.0962] [1] 0.  ErrorRecord: Save() is not supported on a read-only object.
[03/18/2015 20:17:47.0962] [1] 0.  ErrorRecord: System.InvalidOperationException: Save() is not supported on a read-only object.
   at Microsoft.Exchange.Data.Directory.ADDataSession.Save(ADObject instanceToSave, IEnumerable`1 properties, Boolean bypassValidation)
   at Microsoft.Exchange.Management.Tasks.InitializeDomainPermissions.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__8()
   at Microsoft.Exchange.Configuration.Core.LatencyTrackerExtension.StartAndEndInternalTracking(LatencyTracker latencyTracker, String groupName, String funcName, Boolean logDetailsAlways, Action action)
   at Microsoft.Exchange.Configuration.Core.CmdletLatencyTracker.StartAndEndInternalTracking(Guid cmdletUniqueId, String groupName, String funcName, Boolean logDetailsAlways, Action action)
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__7()
   at Microsoft.Exchange.Configuration.Core.LatencyTrackerExtension.StartAndEndInternalTracking(LatencyTracker latencyTracker, String groupName, String funcName, Boolean logDetailsAlways, Action action)
   at Microsoft.Exchange.Configuration.Core.CmdletLatencyTracker.StartAndEndInternalTracking(Guid cmdletUniqueId, String groupName, String funcName, Boolean logDetailsAlways, Action action)
   at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
   at System.Management.Automation.CommandProcessor.ProcessRecord()

Thanks!

Regards, Raymond

↧
↧

CU8 Update Fails with Error

April 27, 2015, 7:47 am
$
0
0

Hi, we're trying to update our Exchange Server 2013 from CU7 to CU8.  One of our servers updated successfully (with problems after installing but were resolved).  One our production server, when running the update we receive an error saying the following:

"Incomplete Installation Detected" followed by "Setup has detected that a previous installation of exchange on this computer didn't complete successfully.  Setup will try to complete this installation.  Click next to continue."

When we click on next, the setup fails with an error saying the following:

"Warning: An unexpected error has occurred and a Watson dump is being generated:  Could not find a part of the path 'C:\Windows\Temp\ExchangeSetup\bin\EnterpriseServiceEndpointsConfig.xml'."

We found a path like that in a different directory and copied it so it matched the path and file but when running the setup again, the file got deleted and we received the same error.  Also couldn't find a .dmp file or log file in the Windows debug folder that had to do with this error.

Any help would be appreciated.

Thanks,

John

↧

from 2010 to 2013: post installation to do

April 30, 2015, 5:25 am
$
0
0

Have install 2013 SP1 CU8 with all roles (hostname ex01) near 2010 SP3 CU9 (hostname ex02). Now i have some questions...

Yesterday i logged on https:\\EX02\ECP and moved test users mailbox. After that Outlook this user can't connect to Exchange. It still try to connect to EX01. I thought that Outlook will automatically reconnect to right Client Access server for test user because he was moved on new server

What i should configure on EX01 or EX02 for test user that his Outlook will connect to EX02?

Today i (as administrator) try to login on https:\\EX02\ECP but i redirected to https:\\EX01\ECP but yesterday i can login to EX02.

if i tru to login as test user to https:\\EX02\ECP - it works. If i try to login as test user to https:\\EX02\OWA - got error "Something went wrong"

What do I have to configure that OWA of test user would work and ECP for administrator as well?

Thank you!



↧

Error when trying to create/edit users in the tree domain from exchange

April 30, 2015, 5:54 am
$
0
0

The scenario is we have one forest and two different domains in tree domain architecture(Forest : expo.com)(tree : dept.com) with windows 2012R2

We have deployed exchange 2013 in another server with windows 2012R2 based on expo.com.

When I try to create new user for dept.com I am getting the below error. but the same is working for expo.com

error
Active Directory operation failed on Server2.dept.com. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521E1, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 

When I try to create mailbox for the existing user in the dept.com i am getting the below error. but the same is working for expo.com

error
Active Directory operation failed on Server2.dept.com. This error is not retriable. Additional information: Insufficient access rights to perform the operation. Active directory response: 00002098: SecErr: DSID-03150BC1, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 

Please help on providing me the details of configuration to do for solving the issue.


↧
Viewing all 7008 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>