Hi,
can some try to help with below Q please?
Can migration of mailboxes from exchange 2007 to exchange 2013 (cross forest be achieved) without migrating the user objects (using ADMT or any other tool) with a one way trust in place?
and then if the trust is broken will the user objects need to be migrated to exchange 2013 (new forest?)
Virtual Techie
When I create the user's profile using RPC/HTTP, I can logon this profile with outlook, but I can not logon the same user's profile created with MAPI over Http.
My question is: Is this the limitation for MAPI over Http? the profile user must the same as windows login user? why the credential window didn't popup when I checked the "Always prompt for logon credentials" in profile's setting?
Thank you,
So I've decided to start testing SSL offloading with Exchange 2013 SP1 now that it is supported. I have followed this guide: http://technet.microsoft.com/library/dn635115(EXCHG.150).aspx. It is fairly straightforward, remove the "Require SSL" option on the VDIRS and IISRESET.
To test, I load up http://CAS/OWA and it immediately redirects to HTTPS://CAS/OWA. I do not see why it is doing this or how to configure it otherwise. So while my server is accepting connections on port 80, it's just bouncing them over to 443. How do we disable this?
I checked the HTTP Redirect option on the VDIRs, which is not present. Also, I am going straight to the server, so there is not a device in front that is redirecting my requests. Any thoughts?
Thanks,
Brandon
Hi guys.
Migratin PF 2010->2013.
If I take a look of PF DB folder size on 2010 its 38.8 GB, but the migration batch process on ex2013 is already on 48.GB:
On EX2010 (before the migration) I have set: keep deleted items 0 days, and dismount/mounted the db, restarted Information store.
On PF DB on 2013 indexing is currently disabled (to speed migration process).
But I am still wondering where did all that data come (the difference between DB size on ex2010 and the "batch transfered Gigabytes"?
With best regards
bostjanc
Trying to download Hotfix KB2619234 which is pre-req for exchnage 2013 installation on Win 2008 R2.
After providing the e-mail address and request hotfix....received error...The system is currently unavialable, Please try back later r contact support if you want immediate assitance.Seems like the HF is not available for download now, Any other option to get this HF?
Thanks,
Praveen
Hello,
I get the following error prior to the upgrade. Do you have information?
Error:
Setup can't continue with the upgrade because the monad (35812) has open files. Close the process, and then restart Setup.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ProcessNeedsToBeClosedOnUpgrade.aspx
Thanks.
I have to migrate from exchange 2003 to 2010 or 2013, this is the setup
Forest n Domain Functional Level: Win 2003
GC/DC : Win 2003
Exchange : Clustered Exchange 2003 Std
Mailbox : 170 Users
My domain is a child domain, the parent and other child domains are also using exchange 2003 only.
i have 2 new servers, my plan is , install win 2012 with HyperV , create 2 VM for each server.
Host1 : VM 1: Exchange 2010 MBX , VM2: Exchange 2010 CAS/HT
Host2: VM 3: Exchange 2010 MBX , VM4: Exchange 2010 CAS/HT
Create DAG for VM1&3, create Client Access Array for VM 2 & 4
Is it possible ? do i need a witness server for DAG?
Appreciate for all help !
Exchange CU7
I'm planning to upgrade into CU9, I have test lab(CASx2, MBX2), so will upgrade them, I'm looking for procedure including check list and careful points about upgrade. Anyone knows?
Hi
Having difficulties over the last few days and would be very grateful for some help.
We're currently migrating from Exchange 2010 to 2013 all appeared to be working fine until I installed Rollup 10. At this point I was unable to logon to OWA or ECP all I would get was a loop in the logon process, each time I entered the logon, I got returned to the logon screen. After fiddling with some authentication settings I appeared to make things worse.
I decided to recreate the OWA and ECP virtual directories and now when I logon I get
The user name or password you entered isn't correct. Try entering it again.
Please can someone help this is driving me mad!
AD : 1 Domain
Exchange Svr 2013 : 1 Domain
When I create new email user,I want choose another domain suffix in logon name column, it is possible?
Regards, Noval
I understand that this is because of changes to the way things are done from 2010 onwards?
Not sure if this affects both distribution AND security groups?
https://support.microsoft.com/en-us/kb/2586832
Also, seen this:-
http://blogs.technet.com/b/exchange/archive/2009/11/18/how-to-manage-groups-that-i-already-own-in-exchange-2010.aspx
Is this a way to enable this? i.e. original users able to manage as they did before?
Got a shared mailbox that we've migrated to 2013.
A number of 2007 mailboxes have full access and send as permission. This is reflected in both 2013 web console and 2007 admin console.
Is there any reason why this would not work if the 2007 user tried to send as the 2013 shared mailbox? I assume it should.
Hi All,
I have a massive dilemma.
Currently we have 2 physical servers.
Server 1 runs windows 2003 SBS and Exchange 2003.
This is also a domain controller.
Server 2 runs Windows 2008 R2 and has a dedicated financial application on it. It is a member server.
Since the server hardware is getting very old, it has come the time to get a new server that will replace these 2 servers.
I am planning to have the free Hyper-V 2012 R2 server (no GUI) installed on it and create virtual machines that will run Windows 2012 R2 server STD and Exchange 2013 SP1.
The problem is that Exchange 2013 server cannot coexist with Exchange 2003 server and Microsoft recommends a double hop migration by using exchange 2010 first and then upgrading to Exchange 2013.
This is too much trouble for a small business that only has 7 mailboxes. Also there would be an additional cost to upgrade to Exchange 2013 from Exchange 2010.
I read that I can export the mailboxes as PST files and then re-import onto the new exchange server as long as I preserve the X500 attributes. There are no public folders used.
The other problem is to migrate active directory to the new Windows 2012 R2 server using the AD migration tool. Because Exchange 2013 cannot coexist I have to setup a new AD forest, I believe.
But there is a lot of preparation for this to happen.
Does it mean that I will need to first install the hypervisor onto the new server, then create a VM for Windows 2012 to act as a global catalog DC for a new AD forest , then setup another Windows 2012 R2 member server VM to run the Exchange 2013 server within this new forest.
Then I would have to migrate AD ie users, groups, computers, passwords etc.
After that I would need to setup exchange 2013 with send/receive connectors, re-create all email addresses, import mailboxes etc.
This is a nightmare. I cannot understand why MS did not provide coexistence with Exchange 2003 server.
Can someone steer me in the right direction?
Should I install the Hyper-V 2012 server in workgroup mode first, then create my VMs for the new AD forest?
Also can I P2V the windows 2008 server I mentioned earlier and rejoin this converted machine to the new forest?
I have never performed such an operation before and need some pointers and help.
Thank you in advance.
Best regards
Alfred56
Hi,
I have Exchange 2013 and 2007 running in coexistence and Outlook clients can connect to their respective mailboxes.
I am however going round in circles now with OWA which I am currently testing internally first before rolling out to external users.
I've read and followed various articles and seem to be getting a step closer each time and hopefully someone can point me in the right direction for the final hurdle!
The issue we are having is as follows:
We enter URL of https://mail.mycompany.com/owa which in turn presents the 2013 OWA page. We enter credentials for a 2013 mailbox user and get straight into OWA no problems at all.
So we do the same with a 2007 mailbox user, enter credentials "domain\user", OWA redirects and presents a second login screen which I can see is to connect to the legacy.mycompany.com/owa site.
However after entering the credentials for the second time, the web page refreshes and takes the user back the original 2013 landing page.
Grateful for any suggestions.
Many thanks
Chris
Team,
One of the customer is planing to host new Exchange 2013 server in DMZ vlan instead of server vlan where my AD is residing at l3 switch. Please comment is this design will work . In case not than what will be challenge and in case of mail flow and client coneectivity.
Hi!
After migrating to 2013 from 2010 we are facing issue with outlook asking password again and again. When we run Get-OutlookAnywhere | FL
we got this:
The New server name is Mail-EX13 and old is Mail-Ex10. We restarted the new server but still the same problem. Should we restart the old server as well?
RunspaceId : 41fbdafe-0825-4605-9d03-9f4a1a720160
ServerName : MAIL-EX10
SSLOffloading : False
ExternalHostname : mail.server.com.
InternalHostname :
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
II uthenticationMethods : {Basic, Ntlm}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : False
MetabasePath : IIS://SERVER-EX10.server.com. /W3SVC/1/ROOT/Rpc
Path : C:\Windows\System32\RpcProxy
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 14.3 (Build 123.4)
Server : SERVER-EX10
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=SERVER-EX10,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=SERVER,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=server,DC=com,DC=
Identity : SERVER-EX10\Rpc (Default Web Site)
Guid : e0e74574-8115-4a87-bfe2-f759b709cc2e
ObjectCategory : server.com. /Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 11/6/2015 6:19:29 AM
WhenCreated : 4/4/2014 1:31:29 AM
WhenChangedUTC : 11/6/2015 3:19:29 AM
WhenCreatedUTC : 4/3/2014 10:31:29 PM
OrganizationId :
Id : SERVER-EX10\Rpc (Default Web Site)
OriginatingServer : server-dc1.server.com.
IsValid : True
ObjectState : Changed
RunspaceId : 41fbdafe-0825-4605-9d03-9f4a1a720160
ServerName : SERVER-EX13
SSLOffloading : True
ExternalHostname : mail.domain.com.
InternalHostname : mail.domain.com.
ExternalClientAuthenticationMethod : Negotiate
InternalClientAuthenticationMethod : Ntlm
II uthenticationMethods : {Basic, Ntlm, Negotiate}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://SERVER-EX13.server.com. /W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 1130.7)
Server : SERVER-EX13
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web
Site),CN=HTTP,CN=Protocols,CN=SERVER-EX13,CN=Servers,CN=Exchange Administrative
Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=SERVER,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=server,DC=com,DC=
Identity : SERVER-EX13\Rpc (Default Web Site)
Guid : f0bc18e3-6aea-4e41-b345-d6210296383d
ObjectCategory : server.com. /Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 11/8/2015 10:25:49 AM
WhenCreated : 11/5/2015 10:34:50 PM
WhenChangedUTC : 11/8/2015 7:25:49 AM
WhenCreatedUTC : 11/5/2015 7:34:50 PM
OrganizationId :
Id : SERVER-EX13\Rpc (Default Web Site)
OriginatingServer : server-dc1.server.com.
IsValid : True
ObjectState : Changed
Way earlier with Exchange 2010 office 365 used to give us an option to modify the remote routing address using Hybrid configuration wizard. Some how the same config has been implemented in my organization not sure who and why deployed it.So currently all the accounts in my org have a different remote routing address instead of xyz.mail.onmicrosoft.com
I need to migrate exchange 2010 servers to 2013 and eventually have to move the hybrid server role on exchange 2013 too. Can someone update/guide me if there is an option available with me to keep the remote routing address as customized and still proceed on deployment of new exchange 2013 servers.