Quantcast
Channel: Exchange Server 2013 - Setup, Deployment, Updates, and Migration 论坛
Viewing all 7008 articles
Browse latest View live

How to install a HCW tool in exchange server 2013 with server that have 3 CAS server ?

$
0
0

Now I have a question about how to install HCW tool if there are 3 CAS servers ?

Very happy if anyone answered this question


Exchange 2007 SP3 is still available?

$
0
0

Hi Team! I am involved in an upgrade project from E2007 with SP1 to E2013. The minimal requirements for this upgrade is E2007 SP3 with RU10. I am searching in Microsoft Download Center and Support Center, but the links for download them aren´t yet available.

Can anyone indicate me how to get Exchange 2007 SP3 and Roll up 10 or above?

Thanks in advanced!

Move edge subscription to new server after migration

$
0
0

Hello,

We have been baffled with moving our edge subscription from exchange 2007 server to exchange 2013 after migration for many months without success.  We must missing something very simple here, here is what we have done so far.  Our original setup was exchange 2007 edge and exchange 2007 mailbox server.  We want to upgrade to exchange 2013 so here are the steps we have done:

1. setup a new exchange 2013 sp1 edge server.

2. remove edge subscription from exchange 2007 mailbox server and re-subscribed to the new exchange 2013 sp1 server.

3. setup a new exchange 2013 sp1 mailbox server running side by side with the existing 2007 mailbox server.

4. migrate all the mailboxes and public folders from exchange 2007 to exchange 2013.  everything worked correctly.

5. want to retire the old exchange server so we need to move the edge subscription to the new exchange 2013 server.

I remove the edge subscription from the exchange 2007 server and create a new subscription from the edge server.  When I want to import the edge subscription to the exchange 2013 server, it will not subscribe.  I can't remember the exact error message but it just failed.  I can import the edge subscription to the old exchange 2007 server without any issues.  Does anyone know why I can't subscribe the edge server to the new exchange 2013 server?  What's the proper way to change the subscription when you have to exchange servers running side by side?  With the edge subscription being on the exchange 2007 server, the incoming emails go to exchange 2007 first and then exchange 2013 where all the mailboxes are.  We want to get rid of the old exchange 2007 server.  Thank you very much!

Will

Azure AD Connect trying to sync SystemMailbox

$
0
0

Good Afternoon,

As mentioned in a previous thread, I am migrating Exchange 2007 (2 NLB CAS/HUB, 2 MBX CCR) with a hybrid Exchange 2010 server to Exchange 2013. Since I am a glutton for punishment, and inherited an environment that also needed Active Directory and DirSync upgraded, I have taken care of those already; some 2012r2 DC's mixed with 2008r2's in a Forest Functional Level of 2008r2 and made the jump to Azure AD Connect this week.

Last night, after prepping the Schema and AD's (2 sibling Domains in same forest) Azure AD Connect started alerting every 30 minutes about not being able to sync a SystemMailbox account from the Forest Root Domain. With a creation date of yesterday, I assume this was created during the AD Prep. My question is, after reading through the AAD Connect documentation, that this should not be happening at all - it should be skipping those mailboxes by default. I assume this is happening to me because I upgraded DirSync instead of a fresh install and maybe some rules weren't created correctly?

I haven't seen proof yet, but I did find something from Microsoft that it can happen and that I should copy the mail attribute into the mailNickname attribute. Problem being, both are blank.

So, has anyone seen this or able to point me to some documentation on a fix where I don't have to learn the gibberish in the AAD Connect rules? Another possible option, there is supposedly another rule in AAD Connect, that ignores mailNicknames beginning with SystemMailbox, so I could simply copy the samAccountName into that field and force an initial sync?

Thoughts?

Exchange 2013 to Exchange 2016

$
0
0
Hi, i have inhereted an enviroment that has exchange 2013 CU2 and we want to move to CU22 so we migrate to 2016. Is it ok to upgrade straight to CU22? Any advice on the best course of action? Thanks.

Update from Exchange 2013 SP1 to CU8 error

$
0
0

hi,

i've got problem when update to cu8.

the file 'c:\program files\microsoft\exchange server\v15\transportroles\agents\hygiene\asdat.msi' is not a valid installation package for the product microsoft exchange 2007 standard anti-spam filter updates. try to find the installation package 'asdat.msi' in a folder from which you can install microsoft exchange 2007 standard anti-spam filter updates.

please help me..

Detail migration process from EXO to Exchange server 2013

$
0
0

Hi everyone,

Thanks for your interest in this question.

I made migrate mailboxes from EXO to Exchange 2013, but the migration process took a long time (the process took 9 hours but still not done), and it is stuck at step: "LoadingMessages. Percent complete: 20". 

When checking on the EAC, I still see the number of "itemsync" increasing, but I don't know why it's still stuck in LoadMessages step.
So I want to ask 3 questions:
1. Detail migrate from EXO to Exchange-onpremise (I want to know more about the technical process of migrate rather than looking at the log to explain)
2. Why the LoadMessages process is stuck, while the value of "itemsync" is still increasing
3. Does the LoadMessages process take the most time during the entire migrate process?

Glad to receive an answer from you

Public Folder Migration issues

$
0
0
Good morning, I am in the process of trying to migrate my exchange 2007 databases to Exchange 2013. I have been following a couple guides to do so. My environment has two exchange 2007 servers with public folders on them. When I try to run the new-publicfoldermigration request, I get : Couldn't switch the mailbox into sync source mode. I have tried restarting the replication service ,and dismounting and mounting the public folder database. Can anyone suggest what actions I should try next? I have deleted and readded the public folder mailbox on exchange 2013 a couple of times. thank you.

dmg


Does anyone have interest in exchange alternative system on linux

$
0
0

Hi there, does anyone have interests in native mapi system? I have developed a native mapi system, which support outlook directly without any plugin. If anyone has interest in my system, please search STEEP_SYSTEM in github.

TLS1.2

$
0
0

So with PCI compliance we have to disable TLS1.0 and 1.1. Does anyone know of the right way to do this. Here is what we have tried, according to Microsoft we did it wrong.


Upgrade to needed CU of exchange

Exchange Server 2016

Install Cumulative Update (CU) 8 in production for TLS 1.2 support and be ready to upgrade to CU9 after its release if you need to disable TLS 1.0 and TLS 1.1.

Install the newest version of .NET and associated patches supported by your CU (currently 4.7.1).

Exchange Server 2013

Install CU19 in production for TLS 1.2 support and be ready to upgrade to CU20 after its release if you need to disable TLS 1.0 and TLS 1.1.

Install the newest version of .NET and associated patches supported by your CU (currently 4.7.1).

Install needed updates

Windows Server 2016

TLS 1.2 is the default security protocol for Schannel and consumable by WinHTTP.

Ensure you have installed the most recent Monthly Quality Update along with any other offered Windows updates.

Windows Server 2012 R2

TLS 1.2 is the default security protocol for Schannel and consumable by WinHTTP

Ensure your server is current on Windows Updates.

This should include security update KB3161949 for the current version of WinHTTP.

If you rely on SHA512 certificates; please seeKB2973337.

Windows Server 2012

TLS 1.2 is the default security protocol for Schannel.

Ensure your server is current on Windows Updates.

This should include security update KB3161949 for the current version of WinHTTP.

If you rely on SHA512 certificates; please seeKB2973337.

Exchange 2010 Installs Only: Install 3154519 for .NET Framework 3.5.1.

Create the following reg keys for .NET 4.X and TLS 1.2

DOTNet Reg

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\.NETFramework\v4.0.30319]

"SystemDefaultTlsVersions"=dword:00000001

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\.NETFramework\v4.0.30319]

"SystemDefaultTlsVersions"=dword:00000001

TLS Reg

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2]

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Client]

"DisabledByDefault"=dword:00000000

"Enabled"=dword:00000001

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Protocols\TLS 1.2\Server]

"DisabledByDefault"=dword:00000000

"Enabled"=dword:00000001

Invalid SSL Cert

$
0
0

Hi, 

I am getting a invalid certificate after renewing a godaddy SSL cert for Exchange 2013 server. I have even removed the the expired cert. This did not help. In the EAC it shows valid with expiration date of 7-18-21. In a web mail  expiration date is 7-18-19. Any ideas on how to fix this.

Thanks in advance

Dexter Southerland  

Hybrid Migration - Screenshots in calendar entries not migrated

$
0
0

Hoping someone can provide some insight here. We are running an Exch2013->Office365 migration via Full Hybrid. When performing mailboxes moves, screenshots in calendar entries are not migrated. Why could this be and is there any way around it?


CU 23

$
0
0

I ran the installer and the pre req check failed on server pending restart and install RSAT.

I installed RSAT and pre reqs passed apart from server restart.

Re-started server and now when I run installer i get error:

Another version of this product is already installed. Installation of this version cannot continue.

Microsoft Exchange Active Directory Topology Error in Exchange 2013

$
0
0

Hi All,

I am getting the below error in Exchange 2013 and the error pointing to one of the orphaned DC. But the server is not a DC anymore and still it's pointing to that DC. Is there any way to cleanup these DC from AD Database?

Error Details:

The call to Microsoft Exchange Active Directory Topology service on server 'TopologyClientTcpEndpoint (localhost)' returned an error. Error details No suitable domain controller was found in domain abc.xyz.com.

exchange 2007 sp3 rollup 10 or higher download for migration to exchange 2013

$
0
0

Hello

I'm looking for exchange 2007 sp3 rollup 10 or higher download for migration to exchange 2013.

All Microsoft download sources no longer exist.

Where can i find the update file it does not matter which rollup As long as it is above rollup 10?

If I do not have the update I will still be able to do migration to exchange 2013?

eldan


Room Mailbox - No Free/Busy info could be retrieve

$
0
0

Hello,

So i just created a new room mailbox based from this guide: https://docs.microsoft.com/en-us/exchange/recipients/room-mailboxes?view=exchserver-2019

Im using outlook 2016, and the exchange server is 2013. I can see the new room in the room list but when I added the room, it shows me "No free/busy information could be retrieve". I want users to see the time availability of the room so I set it to accept/decline automatically. DO I need to change some property for this to work?

Need scrip to migrate DiscoveryMailboxes from Exchange 2013 to O365

$
0
0

I have a need to move a discovery mailbox from my customer's on Premises Exchange 2013 server to their O365 tenant.

Running the script:

Get-Mailbox -Resultsize unlimited -Filter {RecipientTypeDetails -eq "DiscoveryMailbox"}B

Brings back the following results

The customer needs to have me move the two custom DiscoveryMailboxes from the on premises server (Exchange 2013) to their O365 tenant Exchange.  Since the "alias" is not a user alias the EAC Migration tool will not work.  PowerShell is the next logical option.

I would like to use New-MoveRequesthowever; I do not know how to construct a New-MoveRequest with paramenters to connect correctly to the on-premises server while calling this method from an active PS session connected to the O365 tenant.

Does anyone have a script example for this type of migration?

enable UTF-8 in outlook?

$
0
0

HI guys.
Exchange 2013 on premises.

Outlook 2016.

Hot to enable FROM/TO utf-8 support?

If we type recipient address: "ayça.ozdem@domain.com" in Outlook2016; message sending fails


bostjanc


Migrating from EX 2010 to EX 2013

$
0
0

Tricky one this.

I have been tasked with completing the migration of Exchange from 2010 to 2013.

This was started by someone else who was made redundant and I have no documentation to find out where they got to.

We have new Exchange 2013 servers and Exchange is installed.

I can see a new DAG and Mailbox Stores.

But what I can't work out is what the mailflow is currently.  Outlook Anywhere has been turned on for Outlook so that is one step done.

We also use F5 load balancers in front of our current CAS servers and I can see that the new Echange 2013 servers are NOT in there so I am assuming we are still just using the 2010 CAS servers.

What can I do to work out where in the migration phase we are?

Any thoughts anyone?

Rob

Migration stuck in "Syncing" status

$
0
0

I'm in the process of migrating from E2013 to E2016. I've tried to start my mailbox moves, but any user I migrate just stays in a "syncing" state. I've left batches running for days and it never changes. The users are only test accounts, so there really is almost no data. I am also only doing 1 user at a time until it is successful.

On the E2016 event log, it shows the migration cmdlet was started successfully. No other events after that. On the E2013, no messages there either.

Running the Get-MoveRequest -BatchName "Pilot" | Get-MoveRequestStatistics cmdlet yields nothing. It just returns to a prompt with no output.

I've had to kill the batches forcefully as deleting them also just hangs in a state of deleting.

I've tried restarting a Mailbox Replication as others have suggested and that doesn't do anything either.

Any ideas?

Viewing all 7008 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>