A client has two separate companies each with a unique email domain. One has been moved to Exchange, the other is still on a GMail hosted domain while we prepare to cut them over. The company on GMail can send messages to the company on Exchange, but the company on Exchange cannot send email to the company on GMail. I take it that, because of the domain conflict, the Exchange server attempts to send these messages to the unused Exchange accounts instead of their GMail accounts.

So my question is, is there a way we can temporarily disable the domain for the company that is using GMail until we are ready to change them over, so that emails sent to their domain will route externally to GMail instead of filling up the inboxes of unused accounts? Thanks for your help.

Greetings.

I'm getting 2 errors and 1 warning in the Hybrid Configuration object:

INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint.  This is typically due to incorrect DNS or firewall configuration.  The Office 365 tenant is currently configured to use the following URL for Autodiscover queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838

Any help would be greatly appreciated.

Hello World.

Link to AD thread here:

My company has merged with another.  For political reasons both brands must remain separate with no front facing knowledge of the other brand.  So OWA for example would need 2 links, one for each brand.  I am trying to think of any other areas the domains would appear to the user.  This is what I came up with.

Existing:

Company A Domain

Exchange 2003

Company B Domain

Exchange 2010

Proposed:

Create a new root neutral forest/domain. 

Migrate both domains to 2 new child domains under this new root/forest

Bring the domain to 2012 R2

Create a single Exchange 2013 cluster

Migrate both company mailboxes to new cluster retaining original email addr but have a new neutral recipient policy

What is the best way to accomplish this?

Where exactly does Exchange sit (resource domain)?

How can I have logical separation for each brand to have their own OWA but talking to the single cluster?

Thanks!

So started setting up Exchange 2013 and ran into a random issue regarding the OAB. Resolved by deleting/recreating the OAB in Exchange 2010.

My issue now is setup will not complete, just tells me an "Incomplete Installation Detected" starts to resume the installation.   Upon "next" I receive just a hanging screen of "Setup Progress" which goes no where.   

[06/12/2014 20:05:19.0860] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Starting Microsoft Exchange Server 2013 Setup
[06/12/2014 20:05:19.0876] [0] **********************************************
[06/12/2014 20:05:19.0876] [0] Local time zone: (UTC-05:00) Eastern Time (US & Canada).
[06/12/2014 20:05:19.0876] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[06/12/2014 20:05:19.0876] [0] Setup version: 15.0.516.32.
[06/12/2014 20:05:19.0876] [0] Logged on user: DOMAIN\Admin.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='sourcedir', Value='F:\'.
[06/12/2014 20:05:19.0954] [0] Command Line Parameter Name='mode', Value='Install'.
[06/12/2014 20:05:19.0969] [0] RuntimeAssembly was started with the following command: '/sourcedir:F: /mode:Install'.
[06/12/2014 20:05:20.0344] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:21.0391] [0] Setup is choosing the domain controller to use
[06/12/2014 20:05:21.0595] [0] The MSExchangeADTopology has a persisted domain controller: DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use DOMAIN CONTROLLER
[06/12/2014 20:05:22.0485] [0] Setup is choosing a global catalog...
[06/12/2014 20:05:22.0516] [0] Setup has chosen the global catalog server DOMAIN CONTROLLER.
[06/12/2014 20:05:22.0516] [0] Setup will use the domain controller 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Setup will use the global catalog 'DOMAIN CONTROLLER'.
[06/12/2014 20:05:22.0516] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0532] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0579] [0] Setup will search for an Exchange Server object for the local machine with name 'LOCALHOST'.
[06/12/2014 20:05:22.0751] [0] Exchange Server object found : 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0751] [0] The following roles have been unpacked: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole FrontendTransportRole AdminToolsRole CafeRole
[06/12/2014 20:05:22.0751] [0] The following datacenter roles are unpacked:
[06/12/2014 20:05:22.0751] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole UnifiedMessagingRole AdminToolsRole
[06/12/2014 20:05:22.0766] [0] The local server has some Exchange files installed.
[06/12/2014 20:05:22.0798] [0] Server Name=LOCALHOST
[06/12/2014 20:05:22.0829] [0] Setup will use the path 'F:\' for installing Exchange.
[06/12/2014 20:05:22.0829] [0] Setup will discover the installed roles from server object 'CN=LOCALHOST,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=LOCAL'.
[06/12/2014 20:05:22.0829] [0] 'BridgeheadRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'ClientAccessRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'MailboxRole' is installed on the server object.
[06/12/2014 20:05:22.0829] [0] 'UnifiedMessagingRole' is installed on the server object.
[06/12/2014 20:05:22.0845] [0] The installation mode is set to: 'Install'.
[06/12/2014 20:05:44.0768] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[06/12/2014 20:05:44.0768] [0] Active Directory Initialization status : 'True'.
[06/12/2014 20:05:44.0768] [0] Schema Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Organization Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] Domain Configuration Update Required Status : 'False'.
[06/12/2014 20:05:44.0768] [0] The locally installed version is 15.0.516.32.
[06/12/2014 20:05:44.0768] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server\V15'.
[06/12/2014 20:05:44.0830] [0] Applying default role selection state
[06/12/2014 20:05:44.0877] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:44.0877] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:44.0877] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:44.0893] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:44.0893] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:45.0737] [0] Finished loading screen IncompleteInstallationDetectedPage.
[06/12/2014 20:05:48.0518] [0] Setup is determining what organization-level operations to perform.
[06/12/2014 20:05:48.0518] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN-NAME.
[06/12/2014 20:05:48.0518] [0] Setup will run from path 'C:\Program Files\Microsoft\Exchange Server\V15\'.
[06/12/2014 20:05:48.0518] [0] InstallModeDataHandler has 0 DataHandlers
[06/12/2014 20:05:48.0518] [0] RootDataHandler has 1 DataHandlers
[06/12/2014 20:05:48.0737] [0] Finished loading screen SetupProgressPage.

Hello all,

I have SBS 2003 installed in our system which runs active directory and exchange server 2003 on the same server hardware, and I was wandering if I would be able to use active directory from SBS 2003 in Exchange server 2013. In the TechNet website, it only includes Windows server 2003 standard and enterprise edition. Is SBS included in the list?

 We will be installing Exchange server 2013 on windows server 2012 on a different server hardware and previous server will only work as AD and domain controller

After the Migration of Public Folders from 2007 to 2013 some private marked tasks are hidden.

I see the item with mfcmapi but outlook doesnt show it. I think there is a problem with permission to see private marked items. But there is it possible to set this?

For example Public Delegation in Public Folder Mailbox?

Thanks fpr help

The error I receive occurs at 47% of the Mailbox Role: Transport Service installation.  The details of the error are as follows:

    Mailbox role: Transport service                                                                   FAILED
     The following error was generated when "$error.Clear();
          if ($server -eq $null)
          {
            set-ExchangeServerRole -Identity $RoleNetBIOSName -IsProvisionedServer:$true -DomainController $RoleDomainController
          }
        " was run: "Active Directory operation failed on DC1.xxxxxx.xxxxxx.com. This error is not retriable. Additional information: The object cannot be added because the parent is not on the list of possible superiors.
Active directory response: 00002099: NameErr: DSID-0305109C, problem 2005 (NAMING_VIOLATION), data 0, best match of:
        'CN=EXCH-MBOX1,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=AZGT,CN=
Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxxx,DC=xxxxxx,DC=com'
".

The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.

Also, when opening the setup log I have this:

[12/26/2012 17:51:25.0809] [1] [ERROR] A naming violation occurred.
[12/26/2012 17:51:25.0809] [1] [ERROR-REFERENCE] Id=ProvisionServerComponent___a16cb82f909348d3a32b9046f3bfb9ba Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[12/26/2012 17:51:25.0809] [1] Setup is stopping now because of one or more critical errors.

[12/26/2012 17:51:25.0809] [1] Finished executing component tasks.
[12/26/2012 17:51:25.0809] [1] Ending processing Install-BridgeheadRole
[12/26/2012 17:51:25.0825] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/26/2012 17:51:25.0825] [0] End of Setup
[12/26/2012 17:51:25.0825] [0] **********************************************

I have done a ton of searches trying to find a resolution to this error and there are two pages with a similar issue for Exchange 2007 but after trying the solutions suggested, the installation still fails with the same error.

http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploylegacy/thread/dfa9961a-9b20-4c17-ae4d-ebf44c66c18f/

http://exchangetroubleshooting.blogspot.com/2011/05/unable-to-run-preparead-command.html/

Some additional information:

This is a clean installation of Exchange 2013 in a forest that has never had exchange.

The domain and forest preparations run without errors and are at functional level of 2003.

The Exchange server has all prerequisites installed for a Mailbox server role and is running on a VM with Server 2012 as the OS.

This error occurs on other VMs as well that we are trying to implement as mailbox servers in the same forest.

I am running the installation as an enterprise, schema, domain admin.

Thanks for your help in advance.

Mahmoud

Hi,

on my Exchange (it`s a 2010 Version, but couldn`t find a category for this) i have the following configuration:

Mailbox 1 is located on a partition with 300GB of HDD size, which has 43GB left (physical)

I run: Get-MailboxDatabase -Status | Select-Object Server,Name,AvailableNewMailboxSpace
-> Result 170,00 GBwhitspace

after this, i run: Get-MailboxDatabase "DB" | Get-MailboxStatistics | %{$_.TotalItemSize.Value.ToMB()} | Measure-Object -sum -average -max -mi
-> Resut, Sum 16 GB Total itemsize

So, alltogether we have 43GB pysical HDD + 170GB Whitespace + 16GB Totalitemsize= 229GB
Total HDD size 300GB - 229GB makes = 70 GB

So, my question is where is this 70GB located or is there something wrong with my calculation?

Best regard

Markus

I am trying to install Exchange 2013 CU5 but when it is trying to prepare organization point I get the following error.

Error:

The following error was generated when "$error.Clear(); 
initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions

" was run: "Microsoft.Exchange.Data.Directory.SuitabilityDirectoryException: An Active Directory error 0x51 occurred when trying to check the suitability of server 'MY_Domain_Controler.com'. Error: 'Active directory response: The LDAP server is unavailable.' ---> System.DirectoryServices.Protocols.LdapException: The LDAP server is unavailable.
   at System.DirectoryServices.Protocols.LdapConnection.Connect()
   at System.DirectoryServices.Protocols.LdapConnection.BindHelper(NetworkCredential newCredential, Boolean needSetCredential)
   at Microsoft.Exchange.Data.Directory.PooledLdapConnection.BindWithLogging()
   at Microsoft.Exchange.Data.Directory.PooledLdapConnection.TryBindWithRetry(Int32 maxRetries, ADErrorRecord& errorRecord)
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Data.Directory.TopologyDiscovery.SuitabilityVerifier.CheckIsServerSuitable(String fqdn, Boolean isGlobalCatalog, NetworkCredential credentials, String& writableNC)
   at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, ADObjectId domain, String serverName, Int32 port, NetworkCredential credential)
   at Microsoft.Exchange.Data.Directory.ConnectionPoolManager.GetConnection(ConnectionType connectionType, String partitionFqdn, NetworkCredential networkCredential, String serverName, Int32 port)
   at Microsoft.Exchange.Data.Directory.ADDataSession.GetConnection(String preferredServer, Boolean isWriteOperation, String optionalBaseDN, ADObjectId& rootId, ADScope scope)
   at Microsoft.Exchange.Data.Directory.ADDataSession.GetReadConnection(String preferredServer, String optionalBaseDN, ADObjectId& rootId, ADRawEntry scopeDeteriminingObject, DualSearchMode dualSearchMode)
   at Microsoft.Exchange.Data.Directory.ADGenericReader.GetNextResultCollection(Type controlType, DirectoryControl& responseControl)
   at Microsoft.Exchange.Data.Directory.ADPagedReader`1.GetNextResultCollection()
   at Microsoft.Exchange.Data.Directory.ADGenericPagedReader`1.GetNextPage()
   at Microsoft.Exchange.Data.Directory.ADGenericPagedReader`1.<GetEnumerator>d__0.MoveNext()
   at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientObjectSession.<FindByAccountName>d__2`1.MoveNext()
   at Microsoft.Exchange.Data.Directory.Recipient.ADRecipientObjectSession.FindByAccountName[T](String domainName, String accountName)
   at Microsoft.Exchange.Management.Tasks.InitializeExchangeUniversalGroups.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

I have uninstalled the antivirus from both the domain controller and exchange server and turned off their firewalls but still no luck.  anyone else having this issue or a resolution to it?

Hello all,

Currently running a single server installation of Exchange 2013 CU1 on Server 2008 R2.

Checked prerequisites for updating to CU5 and all looked good.

Launched the CU5 install via GUI, not command prompt, which from what I remember when I installed CU1 using the GUI didn't work very well.

Anyway, CU5 failed telling me I have to uninstall CU1. Checked a couple forums and found the same answer.

Tried to uninstall CU1 via Programs and Features, but that failed because it couldn't find a file. Also tried Change and that errors out saying the installation failed and to run setup from an installation media location.

So, I enabled the services that where disabled by either the CU5 install or the CU1 uninstall and started chasing and correcting errors. I've got it to the point that where it looks like everything is working, but I can't send or receive. I'm trying to find an error message somewhere, but I'm not having any luck finding any.

I've tried to use the Queue Viewer and suspend the queue, but nothing shows up in the queue. I've looked at send and receive connectors and they look OK.

I've been up all night and I'm at a loss right now and could really use some help getting this train back on the tracks.

Thank you,

Dennis

Hi

I am migrating from ex2007 to ex2013 and users on ex2007 cannot access OWA via thehttps://mobile/owa but can access OWA via https://legacy/owa. The legacy users get an 500 error when using mobile/owa. Ex2013 can access OWA usinghttps://mobile/owa just fine

It appears that exchange 2013 is not redirecting to the legacy mailboxes.
     I have created internal and external DNS records that point to the legacy email server
     I have created a tmg publishing rule for the legacy host name
     I have configured DNS records that point mobile.contoso.com to the new exchange 2013 server
     I have configured OWA on the exchange 2007 OW virtual directory with the namespace  legacy.contoso.com/owa

Can anyone tell what else I can check?

I have posted question on other resources as I running short of ideas

Cheers

Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15

We need to set up a hybrid server to allow us to begin moving mailboxes to Exchange Online. We created a new Server 2012 R2 server with Exchange 2013 SP1 to act as our Hybrid server. Reading the literature leaves me with questions about what certificates I need.  My understanding is that the certificates in play on the on-premise Exchange 2010 servers don't need to be changed.

I've looked at the TechNet article "Certificate requirements for hybrid deployments" http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx

Certificate requirements for the new Exchange 2013 SP1 server are still unclear to me, I think the new server needs a SAN certificate with:

Hybridserver.domain.edu

autodiscover.domain.edu

EWS.domain.edu

Can anyone clarify?

Hi,

I'm upgrading a customers Exchange 2013 SP1 to CU5, the Exchange servers are in a child domain.

Running Prepare Schema and PrepareAllDomains are successfull, but PrepareAD fails with "Unable to connect to: mydc.domain.com" The LDAP service are not running !

I did not have this problem when running it for Exchange 2013 SP1.

Any Ideas ?

Thanks

/Geir

Exchange 2007

Hi all,

doing migration of mailboxes from 2010-2013 servers.So far migrated over 1k mailboxes and everything been working fine.Now i get problem with last mailbox.This is a shared mailbox and around 12gb in size.Have moved it to another 2010 database and was fine,but to different 2013 database it is stuck at 10% with error Transientfailure.

I have tried with the switch -whatif and it didnt show any error.

Any tips on what i can do to fix this?

thanks!

Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

I went to install the CU5 update today and it fails on the step Mailbox role: transport service.

Error:
The following error was generated when "$error.Clear(); 
          $connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
          foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ReceiveConnectorRoleConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MAIL\MFP". Receive connectors assigned to different Transport roles on a single server must listen on unique local IP address & port bindings.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Error:
The following error was generated when "$error.Clear(); 
          $connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
          foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ReceiveConnectorRoleConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MAIL\Client Frontend MAIL". Receive connectors assigned to different Transport roles on a single server must listen on unique local IP address & port bindings.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

When I try to re-run the setup, it fails at the same spot. I can't use the ECP nor the Shell to remove the Receive Connector (it is just a receive connector for the MFP).

Is there any way to remove this receive connector with Powershell not working?

Hi there,

I've just deployed a fresh CAS and setup a CAS Array, a second CAS will be put in with the next few days once I've sorted the main config out.

I've been going through sorting out the URLs and asking myself a few questions. Can or Should I be using the CASArray name in some of the URLs instead of the CAS host name. For example :

On the "Set-WebServicesVirtualDirectory -InternalUrl" im using https://CasArray.domain.com/ews....."

however on the "Set-ClientAccesServer - AutoDiscoverServiceInternalUri" im usinghttps://CasServer1.domain.com/autodiscover...

Same for "Set-OabVirtualDirecotry -InternalUrl" = https://CasServer1.domain.com/OAB"

Also "Set-AutodiscoverVirtualDirectory -InternalUrl" = https://CasServer1.domain.com/autodiscover...

So my question is should I be using the Array name for any of these URLs or is that only used for the EWS InternalUrl

Any help here would be great.

Regards

(there wasn't a 2010 option for thread)

Exchange 2010 SP3 - Trying to enable internet calendar sharing following this article:http://technet.microsoft.com/en-us/library/ff607475(v=exchg.141).aspx

Having trouble with the following step:

Use the Shell to enable the publishing virtual directory

Set-OwaVirtualDirectory -Identity "CAS01" -ExternalUrl "<URL for the CAS01>" -CalendarPublishingEnabled $true

From shell:

[PS] C:\windows\system32>Set-OwaVirtualDirectory -Identity "MYSERVERCAS" -ExternalUrl "mail.myserver.com" -CalendarPublishingEnabled $true
The operation couldn't be performed because object 'MYSERVERCAS.DOMAIN.LOCAL\MYSERVERCAS' couldn't be found on 'DOMAINCONTROLLER.DOMAIN.LOCAL'.
    + CategoryInfo          : NotSpecified: (0:Int32) [Set-OwaVirtualDirectory], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 6318C04C,Microsoft.Exchange.Management.SystemConfigurationTasks.SetOwaVirtualDirectory

[PS] C:\windows\system32>

Cans some please assist. What is the correct syntax to get the virtual directories created for anonymous internet calendar sharing.

Orange County District Attorney