Hi Guys,

Most probably I am going to deliver one project in nearest future, which included to move Mailboxes and mail data from Novel Group-wise to Exchange 2013. i want to know what should be the approach and what are the per-requisites that need to be consider to perform Migration steps in above scenario? please let me know how the mail-flow work to/from Group-wise to exchange 2013 and vice-verse. please suggest me some initial steps and URLs for this requirement. i want to be clarified logically before i suggest any solution on this to my customer.

step by step docs will be more helpful to achieve this goal..

Regards,

Aanand Singh

I made my first attempt at migrating from 2007 to 2013 but ran into some problems. My 2013 CAS and MB servers are successfully installed along with their prerequisites (AD entries, external and internal DNS is active or ready to be, FW rules etc..). I'm at this point here in the Microsoft plan..

http://technet.microsoft.com/en-US/exdeploy2013/PrintChecklist?state=2284-W-CQCkAgIAQACACEEAAQAAAA~~

"Perform the switch over"

My questions are about behavior.

1. When I have everything setup correctly and DNS and the SCP's changed, the Webmail OWA site for all users will be the 2013 login interface, and after logging in will my 2007 users then see the 2007 OWA interface on my old CAS?, or will they access their 2007 MB using the 2013 interface?

2. There is a "backend imap4" service on my 2013 servers.  We will still have some 2007 mapi connected MB clients.  Do I need these services started to hand off 2007 mapi requests to the 2007 portion of the environment?

I have two problems, but the second problem started when I tried to integrate an office web apps server with exchange 2013 so I am putting them into one post.

I have two Windows Server 2012 boxes, one with Exchange 2013 (both roles) one with only Office Web Apps Server 2013. Exchange 2013 was working perfectly internally and externally.

First issue - When I try and preview a document, I get the message "The WebReady Document Viewing service has been disabled by the administration for your organization. For more information, contact your helpdesk"."

I am not using https for this test setup (AllowHttp is True), and the http.../hosting/discovery URL works fine both internally and externally.  I followed this guide to integrate Exchange with my Office WA server:

http://technet.microsoft.com/library/2591b1be-92c4-4192-9f5e-e4e6b319170a

Second issue - if I access Exchange OWA on the internal URL http://server/owa, when I click on a message the right pane says in red text "Your request can't be completed right now. Please try again later.

If I access the external URL (even from an internal computer, where DNS is setup to resolve to the internal IP address of the exchange CAS), everything works fine (except for the Webready Document viewing)

This second issue only started occurring when I tried to integrate office web apps, but even If I remove the WACDiscoveryEndPoint from the exchange OrganizationConfig the problem persists.

Any help appreciated.

Blair

Hello Everyone,

Yesterday I migrated from Exchange 2010 SP3 RU4 to 2013 CU3. Ex 2010 has not been decommissioned yet.

Last thing I did during the migration process was moving public folders to Ex 2013.

Then I deleted PF database from Ex 2010. ...And then I realized that I have several clients running Outlook 2007/2010 on Windows XP.

Is there a way to move public folders back from 2013 to 2010 to allow access to public folders to those clients?

I think of creating new PF database on Ex 2010 and doing some powershell command to move PF from Ex 2013 to 2010.

But I don't know what commands I should use. New-MailboxMoveRequest ?

If moving PF back to Ex 2010 is possible then it could be faster for me to make PF available to XP clients than buying new hardware with newer Windows.

Any help would be appreciated.

Michal

We are migrating from Domino 8.5.3 to Exchange 2013, the server is patched up to date, we have multiple conversions running.  However, they are all running at an extremely slow pace, around 2 to 10 mbps.  Been trying to troubleshoot, looked at the network, I don't think it is a network issue have tested, used tasmo, wireshark can't find anything.  The error we see is Error: Set Props --MAPI reconnected 80040125 Attempting Retry.  Does anyone have any idea how to troubleshoot from here? 

Thank you very much.

Hi ,

We have a hyper-v virtual environment with 2 DC's ,2 CAS and 2 Mailbox servers. Created DAG environment for mailbox server and WNLB for CAS server.

all the servers are in RTM release and would like to update to CU3.

How to upgrade the servers to CU3 ,could someone help me out with a document for upgrading the multi server environment.

Thanks

We have found a consistent issue with upgrading from CU2 to CU3, so thought I would share.

Setup is failing on our Mailbox Servers (WS2012 with E2013 CU2 installed)

Setup will start and fail:

[ERROR] The following error was generated when "$error.Clear(); <o:p></o:p>

                    & $RoleBinPath\ServiceControl.ps1 EnableServices Critical<o:p></o:p>

                " was run: "AuthorizationManager check failed.".<o:p></o:p>

[02/15/2014 14:26:03.0805] [1] [ERROR] AuthorizationManager check failed.<o:p></o:p>

To Resolve this issue

Now all 4 Services are running 

Before attempting to re-run  - Check the registry for Watermarks keys under

HKLM\Software\Microsoft\Exchange Server\V15\MidFileCopy.

Delete the two keys you find here.

THen - open Windows Powershell and run

for($i=1;$i-gt0;$i++) { Set-Service -Name WinMgmt -StartupType Automatic }

This keeps the relevant services running during setup.

Now - re run your Setup /M:Upgrade /iacceptexchangeserverlicenseterms

Hope this helps!

Good evening,

Following TechNet closely I'm currently in the process of moving my exchange 2010 environment to 2013.  I have single exchange server on a SBS 2011 box.  Sadly I've failed at the first hurdle installing SP3, the result is that my Exchange 2010 is refusing all client connections.

During the SP3 install I passed all prerequisites but during the actual upgrade it failed at the Hub Transport Role with the following error:

Summary: 8 item(s). 3 succeeded, 1 failed.
Elapsed time: 00:20:46
Language Files
Completed

Elapsed Time: 00:10:25

Restoring services
Completed

Elapsed Time: 00:00:02

Languages
Completed

Elapsed Time: 00:03:32

Hub Transport Role
Failed

Error:
The following error was generated when "$error.Clear();
          Write-ExchangeSetupLog -Info "Creating SBS certificate";

          $thumbprint = [Microsoft.Win32.Registry]::GetValue("HKEY_LOCAL_MACHINE\Software\Microsoft\SmallBusinessServer\Networking", "LeafCertThumbPrint", $null);

          if (![System.String]::IsNullOrEmpty($thumbprint))
          {
            Write-ExchangeSetupLog -Info "Enabling certificate with thumbprint: $thumbprint for SMTP service";
            Enable-ExchangeCertificate -Thumbprint $thumbprint -Services SMTP;
           
            Write-ExchangeSetupLog -Info "Removing default Exchange Certificate";
            Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"} | Remove-ExchangeCertificate;

            Write-ExchangeSetupLog -Info "Checking if default Exchange Certificate is removed";
            $certs = Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"};
            if ($certs)
            {
              Write-ExchangeSetupLog -Error "Failed to remove existing exchange certificate"
            }
          }
          else
          {
            Write-ExchangeSetupLog -Warning "Cannot find the SBS certificate";
          }
        " was run: "The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.".

The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp

Elapsed Time: 00:06:46

Client Access Role
Cancelled
Mailbox Role
Cancelled
Management Tools
Cancelled
Finalizing Setup
Cancelled

The setup log shows the following details:

Ending processing Get-ExchangeCertificate
[07/31/2013 20:50:46.0516] [1] The following 1 error(s) occurred during task execution:
[07/31/2013 20:50:46.0516] [1] 0.  ErrorRecord: The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
[07/31/2013 20:50:46.0516] [1] 0.  ErrorRecord: System.InvalidOperationException: The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
[07/31/2013 20:50:46.0531] [1] [ERROR] The following error was generated when "$error.Clear();
          Write-ExchangeSetupLog -Info "Creating SBS certificate";

          $thumbprint = [Microsoft.Win32.Registry]::GetValue("HKEY_LOCAL_MACHINE\Software\Microsoft\SmallBusinessServer\Networking", "LeafCertThumbPrint", $null);

          if (![System.String]::IsNullOrEmpty($thumbprint))
          {
            Write-ExchangeSetupLog -Info "Enabling certificate with thumbprint: $thumbprint for SMTP service";
            Enable-ExchangeCertificate -Thumbprint $thumbprint -Services SMTP;
           
            Write-ExchangeSetupLog -Info "Removing default Exchange Certificate";
            Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"} | Remove-ExchangeCertificate;

            Write-ExchangeSetupLog -Info "Checking if default Exchange Certificate is removed";
            $certs = Get-ExchangeCertificate | where {$_.FriendlyName.ToString() -eq "Microsoft Exchange"};
            if ($certs)
            {
              Write-ExchangeSetupLog -Error "Failed to remove existing exchange certificate"
            }
          }
          else
          {
            Write-ExchangeSetupLog -Warning "Cannot find the SBS certificate";
          }
        " was run: "The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.".
[07/31/2013 20:50:46.0531] [1] [ERROR] The certificate with thumbprint 355E62E464DCF42A08BCB7A8CF39C819D42B760E was not found.
[07/31/2013 20:50:46.0531] [1] [ERROR-REFERENCE] Id=SbsBridgeHeadComponent___6464a0ee0fd04f6b893a3c81d7eb3f26 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup\SBS
[07/31/2013 20:50:46.0531] [1] Setup is stopping now because of one or more critical errors.
[07/31/2013 20:50:46.0531] [1] Finished executing component tasks.
[07/31/2013 20:50:46.0594] [1] Ending processing Install-BridgeheadRole

 My application event log is flooded with the following error:

Log Name:      Application
Source:        Microsoft-Windows-IIS-W3SVC-WP
Date:          31/07/2013 21:59:43
Event ID:      2280
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SRV-SBS.lawrencedavid.local
Description:
The Module DLL C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\exppw.dll failed to load.  The data is the error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
    <EventID Qualifiers="49152">2280</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-31T20:59:43.000000000Z" />
    <EventRecordID>975085</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>SRV-SBS.lawrencedavid.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data Name="ModuleDll">C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\Owa\auth\exppw.dll</Data>
    <Binary>05000000</Binary>
  </EventData>
</Event>

I've tried to re-register exppw.dll following instructions in the TechNet forums but this hasn't helped to restore functionality or complete the SP3 installation.  Any guidance would be most appreciated.  Thanks in advance!

I try to migrate mailboxes between two Exchange organizations. 

Source have Exchange 2007 Sp3 and AD on Windows 2008 R2.

Destination has Exchange 2013 Cu3 on Windows Server 2013. Ad on this forest is 2012.

Source AD is: contoso.com

Destination is: fabrikam.com

Trust: $false

.\Prepare-Movereguest runs without any problems.

Its no trus between the forests

No traffic is blocked by FW

I have used this article http://blogs.technet.com/b/exchange/archive/2010/08/10/3410619.aspx

- EventData

   New-MoveRequest
   {RemoteLegacy=True, Identity=User01, RemoteCredential=System.Management.Automation.PSCredential, SuspendWhenReadyToComplete=True, TargetDatabase=Users01, TargetDeliveryDomain=fabrikam.com, BadItemLimit=100, RemoteGlobalCatalog=azrad01.contoso.com, AcceptLargeDataLoss=True}
   fabrikam.com/Users/ivarasen
   S-1-5-21-4127437306-2113419879-3149575443-500
   S-1-5-21-4127437306-2113419879-3149575443-500
   Remote-ManagementShell-Unknown
   9176 w3wp#MSExchangePowerShellAppPool
   
   25
   00:00:00
   View Entire Forest: 'False', Default Scope: 'fabrikam.com', Configuration Domain Controller: 'Azrad02.fabrikam.com', Preferred Global Catalog: 'Azrad02.fabrikam.com', Preferred Domain Controllers: '{ Azrad02.fabrikam.com }'
   Microsoft.Exchange.MailboxReplicationService.TimeoutErrorTransientException: The call to 'net.tcp://azrex01.fabrikam.com/Microsoft.Exchange.MailboxReplicationService AzrEx01.fabrikam.com (15.0.775.35 caps:3F)' timed out. Error details: This request operation sent to net.tcp://azrex01.fabrikam.com/Microsoft.Exchange.MailboxReplicationService did not receive a reply within the configured timeout (00:01:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client. ---> System.TimeoutException: This request operation sent to net.tcp://azrex01.fabrikam.com/Microsoft.Exchange.MailboxReplicationService did not receive a reply within the configured timeout (00:01:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client. Server stack trace: at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.Exchange.MailboxReplicationService.IMailboxReplicationService.GetMailboxInformation3(Guid primaryMailboxGuid, Guid physicalMailboxGuid, Byte[] partitionHint, Guid targetMdbGuid, String targetMdbName, String remoteHostName, String remoteOrgName, String remoteDCName, String username, String password, String domain) at Microsoft.Exchange.MailboxReplicationService.MailboxReplicationServiceClient.<>c__DisplayClassa.<GetMailboxInformation>b__9() at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CallWCFService[ExceptionT](Action serviceCall, String epAddress, Action`1 faultHandler, VersionInformation serverVersion) --- End of inner exception stack trace --- at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CallWCFService[ExceptionT](Action serviceCall, String epAddress, Action`1 faultHandler, VersionInformation serverVersion) at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CallService(Action serviceCall, String epAddress, VersionInformation serverVersion) at Microsoft.Exchange.MailboxReplicationService.MailboxReplicationServiceClient.GetMailboxInformation(Guid primaryMailboxGuid, Guid physicalMailboxGuid, TenantPartitionHint partitionHint, Guid targetMdbGuid, String targetMdbName, String remoteHostName, String remoteOrgName, String remoteDCName, NetworkCredential cred) at Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest.RetrieveSourceMailboxesInfo() at Microsoft.Exchange.Management.RecipientTasks.NewMoveRequest.InternalValidate() at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__8() at Microsoft.Exchange.Configuration.Core.LatencyTrackerExtension.StartAndEndInternalTracking(LatencyTracker latencyTracker, String groupName, String funcName, Boolean logDetailsAlways, Action action) at Microsoft.Exchange.Configuration.Core.CmdletLatencyTracker.StartAndEndInternalTracking(Guid cmdletUniqueId, String groupName, String funcName, Boolean logDetailsAlways, Action action) at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__7()
   ServerTransient
   System.TimeoutException: This request operation sent to net.tcp://azrex01.fabrikam.com/Microsoft.Exchange.MailboxReplicationService did not receive a reply within the configured timeout (00:01:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client. Server stack trace: at System.ServiceModel.Dispatcher.DuplexChannelBinder.Request(Message message, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Microsoft.Exchange.MailboxReplicationService.IMailboxReplicationService.GetMailboxInformation3(Guid primaryMailboxGuid, Guid physicalMailboxGuid, Byte[] partitionHint, Guid targetMdbGuid, String targetMdbName, String remoteHostName, String remoteOrgName, String remoteDCName, String username, String password, String domain) at Microsoft.Exchange.MailboxReplicationService.MailboxReplicationServiceClient.<>c__DisplayClassa.<GetMailboxInformation>b__9() at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CallWCFService[ExceptionT](Action serviceCall, String epAddress, Action`1 faultHandler, VersionInformation serverVersion)
   ExAA9BE9

Best Regards

Rinken

Rinken

Way back, when we first installed Exch2000 on Win2000, we created a ‘resource’ AD domain for the mail servers to sit in because our users resided in multiple AD domains.

 I now see no reason for the mail servers to reside in that domain

 I am planning an upgrade from exch2007sp3 to exch2013 and I would like to eliminate this domain at the same time.

 I plan to migrate the mailboxes to the new Exch2013 server.  The user accounts will remain in their same domains.

 Anyone see a problem with this?

 Thanks

Environment. Exchange 2007 and Exchange 2013

All mailboxes including arbitration mailboxes have been moved to Exchange 2013. No mailboxes exist any longer on Exchange 2007.

I am trying to use the steps here: http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx to move the public folders. I get stuck on step 5

New-PublicFolderMigrationRequest -SourceDatabase (Get-PublicFolderDatabase -Server <Source server name>) -CSVData (Get-Content <Folder to mailbox map path> -Encoding Byte) -BadItemLimit $BadItemLimitCount

This fails with:

FailureCode                      : -2146233088
FailureType                      : DataValidationException

I ran the Fix-alias.ps1 script found here: http://blogs.technet.com/b/exchange/archive/2007/06/15/3403186.aspx and

WARNING: Object domain.local/Users/SystemMailbox{1f05a927-c928-42fb-a18b-9d936002844b} has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
WARNING: The value of property 'RecipientDisplayType', 10, is not defined in the Enum type 'Nullable`1'.
WARNING: The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
WARNING: Object domain.local/Users/SystemMailbox{bb558c35-97f1-4cb9-8ff7-d53741dc928c} has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
WARNING: The value of property 'RecipientDisplayType', 10, is not defined in the Enum type 'Nullable`1'.
WARNING: The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
WARNING: Object domain.local/Users/SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9} has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
WARNING: The value of property 'RecipientDisplayType', 10, is not defined in the Enum type 'Nullable`1'.
WARNING: The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
WARNING: Object domain.local/Users/DiscoverySearchMailbox {D919BA05-46A6-415f-80AD-7E09334BB852} has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
WARNING: The value of property 'RecipientTypeDetails', 536870912, is not defined in the Enum type 'RecipientTypeDetails'.
WARNING: Object domain.local/Users/Migration.8f3e7716-2011-43e4-96b1-aba62d229136 has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
WARNING: The value of property 'RecipientDisplayType', 10, is not defined in the Enum type 'Nullable`1'.
WARNING: The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.
WARNING: Object domain.local/Users/FederatedEmail.4c1f4d8b-8179-4148-93bf-00a95fa1e042 has been corrupted and it is in an inconsistent state. The following validation errors have occurred:
WARNING: The value of property 'RecipientDisplayType', 10, is not defined in the Enum type 'Nullable`1'.
WARNING: The value of property 'RecipientTypeDetails', 8388608, is not defined in the Enum type 'RecipientTypeDetails'.

Not sure what to try next. I thought about recreating the account by doing what is listed here, but haven't tried it yet.

http://jchaven.wordpress.com/2013/07/30/repairing-exchange-discovery-mailboxes/

We are close to finishing a migration from Exchange 2010 to 2013. All mailboxes, public folders and arbitration mailboxes have been moved and everything is running smooth and In-Place eDiscovery searches work fine. I’ve gathered some conflicting information regarding the Discovery Search Mailbox that still resides on the 2010 server (see screenshot below) so I’m hoping someone can provide some insight on what to do with it. In order to remove the 2010 database I will have to either move the Discovery Search Mailbox or remove it.

Numerous articles tell me to move it to the 2013 server using the New-MoveRequest DiscoverySearchMailbox* -TargetDatabase "DB2013"command. Another article tells me to leave it on the 2010 server and delete it from there since it’s a system mailbox for 2010.

The most confusing part is seeing that Exchange 2013’s Discovery Search Mailbox is named SystemMailbox{e0dc1c29-89c3-4034-b678-e6c29d823ed9} (as shown here- http://technet.microsoft.com/en-us/library/gg588318%28v=exchg.150%29.aspx). This mailbox is listed and visible as an arbitration mailbox on our 2013 server right now when I run the Get-Mailbox arbitration command:

I understand that I won’t be able to remove the 2010 database with that mailbox still sitting there, but why should I migrate it, as a lot of sources are telling me to, when the 2013 search discovery mailbox is apparently in place and working? Any thoughts? Thank you!

Don't forget to mark helpful or answer

connect me :-

http://in.linkedin.com/in/satya11

http://facebook.com/satya.1000

anyone pls help me, i'm ready setup few time still facing same error.

Error:

The following error was generated when "$error.Clear();

           if ($RoleCustomerFeedbackEnabled -ne $null)

           {

             $organizationConfig = get-OrganizationConfig;

             if ($organizationConfig.CustomerFeedbackEnabled -ne $False)

             {

               Set-ExchangeServer -Identity $RoleFqdnOrName -CustomerFeedbackEnabled $RoleCustomerFeedbackEnabled;

             }

           }

         " was run: "Property CustomerFeedbackEnabled can't be set on this object because it requires the object to have version 0.1 (8.0.535.0) or later. The object's current version is 0.0 (6.5.6500.0).".

Hello guys,

I want to install MS Exchange Server 2003 on Windows Server 2003, but the setup file that I am downloading has no a setup.exe it only has update.exe. When I search on Google it only gives me SP1 and SP2 setup which has update.exe in the setup folder. Where do I find a setup with setup.exe?

Help me

Thank you

Hi,

We have 2 DC's ,2 CAS server ( in Windows NLB) ,2 mailbox servers in DAG environment. as Directory Synchronization server  is a mandatory equirement for hybrid deployment ... can we install it on one of the DC's or CAS server.

What are the steps to follow for this installation ?

As the directory sync server will sync all the users in onprem to O365 and viceversa ... will Microsoft charge for user sync in O365 ?

Thanks

Hi!

We need to migrate our Exchange 2003 to Exchange 2010 and then to Exchange 2013. We have created a Windows 2008 R2 VM for Exchange 2010. We need to know what kind of vhds we should assign to it for Exchange. Should we assign IDE or SCSI Controllers. The VM is located on the local hard disk of the hyper-v server and not on storage.

Secondly, what is the best document we can follow for Exchange 2003 to 2010 migration for a single server having 400 Users (2GB maximum mailbox size)

Thanks.

In addition to /owa I'd like to add /exchange since our uses were use to that in Exchange 2010.

I see that you can't add to the virtual directories in the Admin console. How can I add a second owa directory? 

Hello,

I have a problem to upgrade an Exchange 2013 CU2 to CU3.

I have two server (ex01 and ex02) in DAG.

Server EX02 upgraded without problems.

On server EX01 I get the following error:

---

C:\temp\Exchange2013CU3>Setup.exe /mode:upgrade /IAcceptExchangeServerLicenseTer
ms

Welcome to Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for
installation.
Languages
Mailbox role: Transport service
Client Access role: Front End Transport service
Mailbox role: Client Access service
Mailbox role: Unified Messaging service
Mailbox role: Mailbox service
Management tools
Client Access role: Client Access Front End service

Performing Microsoft Exchange Server Prerequisite Check

    Configuring Prerequisites                                 COMPLETED
    Prerequisite Analysis                                     COMPLETED
 Setup can't detect a Send connector with an address space of '*'. Mail flow to
the Internet may not work properly.
 For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms
.exch.setupreadiness.NoConnectorToStar.aspx


Configuring Microsoft Exchange Server

    Language Files                                            COMPLETED
    Restoring Services                                        COMPLETED
    Language Configuration                                    COMPLETED
    Mailbox role: Transport service                           COMPLETED
    Client Access role: Front End Transport service           COMPLETED
    Mailbox role: Client Access service                       COMPLETED
    Mailbox role: Unified Messaging service                   COMPLETED
    Mailbox role: Mailbox service                             COMPLETED
    Exchange Management Tools                                 COMPLETED
    Client Access role: Client Access Front End service       FAILED
     The following error was generated when "$error.Clear();
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1"
 -AppPoolName:"MSExchangeOABAppPool" -Version:"v4.0";
          get-OabVirtualDirectory -server $RoleFqdnOrName -DomainController $Rol
eDomainController | set-OabVirtualDirectory -OAuthAuthentication:$true;
        " was run: "Filename: \\?\ClientAccess\OAB\web.config
Error: Cannot write configuration file

".

The Exchange Server setup operation didn't complete. More details can be found
in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.

---

Content of Exchange setup log:

[02.01.2014 18:36:58.0200] [1] [ERROR-REFERENCE] Id=CafeComponent___3c4d5a9090994d57908df348ba3810ea Component=EXCHANGE14:\Current\Release\Shared\DIY\Recipients&Provisioning\OAB
[02.01.2014 18:36:58.0200] [1] Setup is stopping now because of one or more critical errors.
[02.01.2014 18:36:58.0200] [1] Finished executing component tasks.
[02.01.2014 18:36:58.0231] [1] Ending processing Install-CafeRole

I didn't find anything to solve this problem. Maybe someone know what's the problem and how to solve it.

Thanks and regards,

Christian