Hi,

I have updated to CU3 on both the mailbox server . after that when I send an email to internal /external users ,emails are stuck in drafts folder

The test-replicationhealth returning the below output ,it's the same on the other mailbox server too.what could be the issue here

Thanks

Hi All,

I am trying to install Exchange 2013 CU3 on Windows Server 2012 Datacenter Edition. This is New Server Forest build.

Forest Function Level and Domain functional Level is Windows Server 2008 R2

As part of this Fresh installation, I have tried to install CAS Server Role first on the server.

I have full admin (Schema,Entp, Domain) Previliges and installed MS recomended pre-requesities successfully.

Set the Powershell Execution policy as unrestricted.

But, When i run setup file using GUI option. I am getting the below error. I would like to know whether this is ignorable for installation or how to fix the issue.

Error:

Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type

initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.

Task execution result should not be affected.

Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type

initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.

Task execution result should not be affected.

Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for

'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution

result should not be affected.

Note: Server OS hardening policy has been applied in this server as per company security policy and Symantec A/V also installed in this server.

Regards

Manoj

I am following the instructions in the deployment assistant to migrate an in-place Exchange 2010 setup to a new Exchange 2013 server.  I have reached the stage of migrating the arbitration mailbox from its original server to a database on the new one.  This process has now been running for 7 hours and as far as I can see the migrated mailbox size is larger than the database which used to house it.  The deployment assistant estimates this stage as requiring 10 minutes to complete.

Is there a problem and if so what can I do to resolve the issue?

And too high latency!

Hi all

I'm having "issues" with testing my storage solution with Jetstress 2013.

Setup is: VMware VM with 8 vCPUs, 24GB RAM and 500GB raw mapped device from VMAX box.

Device is thin provisioned on RAID 7+1 FC SCSI disk group.

Jetstress setup is as follows:

disk subsystem throughput test,thread autotuning, test for performance, enabled multihost and BDM

With this setup I'm getting about 4500IOPS, but 24msec and 14msec for write/read operations.

EMC guy suggest droping IOPS requirements and then I would get great response times... Suppose I would accomplish that with manually setting thread count? Is the thread count total or per database?

Can anybody explain what is going on? Front-end directors are not choked...

Hi ,

We have migrated exchange 2003 server to 2010 and we migrated all public folders to new exchange 2010 server. But when attempting to send an e-mail to public folder 's e-mail address It says #550 5.2.0 RESOLVER.PF.Invalid; misconfigured public folder mailbox ##. Have you got any idea ? We can see all public folders in outlook client and owa.

Regards.

Dear All

    our company will update exchange 2007 to exchange 2013, on AD site we already update Forest functional level and Domain functinal level  to Windows 2003 ( can not up to windows 2008 yet because have some ad that run windows 2003 server ) but one thing that I'm not sure, between migration we can not full tranfer mailbox form exchange 2007 to exchange 2013 in one time, we need to migrate on night time manybe one day we can migrate only 100 user per night, my question is

1. which exchange 2013 server role that we will install first ( mailbox or CAS)

2. on migration time, can we let's user used exchange 2007 to main of OWA and SMTP or not? we need all user's mailbox tranfer to exchange 2013 complete first after that we will switch OWA and SMTP

Hi,

We have 2 DC's ,2 CAS server ( in Windows NLB) ,2 mailbox servers in DAG environment. as Directory Synchronization server  is a mandatory equirement for hybrid deployment ... can we install it on one of the DC's or CAS server.

What are the steps to follow for this installation ?

As the directory sync server will sync all the users in onprem to O365 and viceversa ... will Microsoft charge for user sync in O365 ?

Thanks

Hi ,

I am currently testing a cross forest migration from exchange 2007 to exchange 2013. i do not have trust between my forest but i did set up conditional forwarding in both the source and target environment.

The Mailbox replication service does not behave as expected when i submit a new move request.

the move request : New-MoveRequest -Identity "f2867850-5e88-4f97-9efb-0b867a1fdb4b" -BadItemLimit "10" -TargetDeliveryDomain "TargetDomain" -TargetDatabase "{cbc90e5e-6124-458c-8105-464bc27d26c1}" -RemoteCredential (Get-Credential "sourcecredential") -RemoteGlobalCatalog "FQDN of source GC" -RemoteLegacy:$true

the error : "The call to 'net.tcp://SERVERNAME/Microsoft.Exchange.MailboxReplicationService SERVERNAME (15.0.775.35 caps:3F)' timed out. Error details: This request operation sent to net.tcp://SERVERNAME/Microsoft.Exchange.MailboxReplicationService did not receive a reply within the configured timeout (00:01:00). The time allotted to this operation may have been a portion of a longer timeout. This may be because the service is still processing the operation or because the service was unable to send a reply message. Please consider increasing the operation timeout (by casting the channel/proxy to IContextChannel and setting the OperationTimeout property) and ensure that the service is able to connect to the client."

I can ping both global catalog in the source environment and in the target from both side. nslookup and autodiscover is working as well.

MRS Proxy is enable on the exchange 2013 side and i have enable remote Powershell on both side.

i do not have any load balancer configure.

If anyone can point me in the right direction where to look it would be greatly appreciated.

thanks you

Frédéric Bédard

Hi Guys & Girls,

I've a painful issue with my environment which is made up of 1 x 2010 CAS server with 1x 2010 Mailbox server and 1x 2013 CAS server with 1 x 2013 mailbox server.

The users who've yet to be migrated to 2013 and are still on the 2010 server are unable to open shared mailboxes which have already been migrated to 2013.

When trying to access shared mailboxes on the 2013 servers they received the following error:

The configuration of OutlookAnywhere on my two CAS servers is as follows:

RunspaceId                         : aed28f13-cdd2-4dcf-a0a8-96b8e2518171
ServerName                         : THCAS1
SSLOffloading                      : True
ExternalHostname                   : mail.resourcegroup.co.uk
InternalHostname                   : mail.resourcegroup.co.uk
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Ntlm}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : False
MetabasePath                       : IIS://THCAS1.ResourceGroup.co.uk/W3SVC/1/ROOT/Rpc
Path                               : C:\Windows\System32\RpcProxy
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 14.3 (Build 123.4)
Server                             : THCAS1
AdminDisplayName                   :
ExchangeVersion                    : 0.10 (14.0.100.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=THCAS1,CN=Servers,CN=Exchange
                                     Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
                                     Groups,CN=ResourceGroup,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=ResourceGroup,DC=co,DC=uk
Identity                           : THCAS1\Rpc (Default Web Site)
Guid                               : 71f76f2a-4ee1-4a9a-b2da-06d79e975403
ObjectCategory                     : ResourceGroup.co.uk/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 26/11/2013 16:23:13
WhenCreated                        : 25/11/2013 16:33:45
WhenChangedUTC                     : 26/11/2013 16:23:13
WhenCreatedUTC                     : 25/11/2013 16:33:45
OrganizationId                     :
OriginatingServer                  : thdc1.ResourceGroup.co.uk
IsValid                            : True
ObjectState                        : Changed

RunspaceId                         : aed28f13-cdd2-4dcf-a0a8-96b8e2518171
ServerName                         : THCAS2
SSLOffloading                      : True
ExternalHostname                   : thcas2.resourcegroup.co.uk
InternalHostname                   : thcas2.resourcegroup.co.uk
ExternalClientAuthenticationMethod : Ntlm
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
XropUrl                            :
ExternalClientsRequireSsl          : True
InternalClientsRequireSsl          : False
MetabasePath                       : IIS://THCAS2.ResourceGroup.co.uk/W3SVC/1/ROOT/Rpc
Path                               : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking    : None
ExtendedProtectionFlags            : {}
ExtendedProtectionSPNList          : {}
AdminDisplayVersion                : Version 15.0 (Build 712.24)
Server                             : THCAS2
AdminDisplayName                   :
ExchangeVersion                    : 0.20 (15.0.0.0)
Name                               : Rpc (Default Web Site)
DistinguishedName                  : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=THCAS2,CN=Servers,CN=Exchange
                                     Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
                                     Groups,CN=ResourceGroup,CN=Microsoft
                                     Exchange,CN=Services,CN=Configuration,DC=ResourceGroup,DC=co,DC=uk
Identity                           : THCAS2\Rpc (Default Web Site)
Guid                               : 39c5133f-14cb-4d44-ae9c-69f7fb0fc432
ObjectCategory                     : ResourceGroup.co.uk/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass                        : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged                        : 26/11/2013 16:23:05
WhenCreated                        : 26/11/2013 12:49:17
WhenChangedUTC                     : 26/11/2013 16:23:05
WhenCreatedUTC                     : 26/11/2013 12:49:17
OrganizationId                     :
OriginatingServer                  : thdc1.ResourceGroup.co.uk
IsValid                            : True
ObjectState                        : Changed

If anyone could offer any help it'd be much appreciated, it's going to take several days to migrate my remaining 2010 users to 2013 which is causing a lot of use complaints.

Hi.

Is there a list of files changed for Rollup 4?

After our RollUp installation, some files in the BIN directory still has the date of 2/5/2013 (SP3, no RollUp4), some has the date of 6/13/2013 (RollUp4)

Despite RollUp4 looks like to have been installed, Exchange Server still reports it's running "Version 14.3 (Build 123.4)"

Thanks...

So i am trying to get users on the internet (external) to setup outlook using autodiscover. I have created dns cname for autodiscover.domain.tld and this appears to work fine. The question i have is what is outlook looking for on the searching foruser@domain.tld server:

This fails from external but works internal. No doubt it is looking on port 443? Is it looking for mail.domain.tld or something else? Looking in dns? Where does it get the info to know what to look for?

Hi,

I am about to migrate from 2010 to 2013, have installed 2013 single server (CAS,MBX) on a exchange2013.domain.com server. I configured all virtual directories and Outlook Anywhere internal and external urls to exchange.domain.com and the official certificate has been issued to exchange.domain.com and autodiscover.domain.com. Both exchange2013.domain.com and exchange.domain.com can be resolved by dns to same address, autodiscover.domain.com is not yet configured in dns.

ECP, OWA , mailbox creation and moves are working as supposed. 

My question is regarding Outlook Anywhere, the only way I can connect from a client and Remote Connectivity Analyzer is by using exchange2013.domain.com as server address, but I want to use exchange.domain.com which is not bound to any hardware. I guess this will not be any problem after setting up the autodiscover in dns but I dont want to configure it before I know things are working as supposed. Shouldn't the client be able to find the user mailbox by the address configured as internal and external, that is exchange.domain.com?

Rpcping gives an 1722 error when trying with server and proxy exchange.domain.com but is ok when using server exchange2013.domain.com and proxy exchange.domain.com.

Regards,
Stefan

Regards
ronnie.jorgensen systems engineer
My blog

I can't get Exchange 2013 to install in our Server 2008 R2 infrastructure. Setup fails with the following error when preparing AD. This is running on Server 2008 R2 SP1 VM's.

Welcome to Microsoft Exchange Server 2013 Cumulative Update 3 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.

Performing Microsoft Exchange Server Prerequisite Check

    Prerequisite Analysis                                                                             COMPLETED

 Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
ected.

 Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
ffected.

 Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.

Configuring Microsoft Exchange Server

    Organization Preparation                                                                          FAILED
     The following error was generated when "$error.Clear();
        install-DefaultAcceptedDomain -Name $RoleFullyQualifiedDomainName -DomainName $RoleFullyQualifiedDomainName -Dom
ainController $RoleDomainController

" was run: "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.".

 Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsof
t.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be aff
ected.

 Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Micros
oft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be a
ffected.

 Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchang
e.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.

The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the

Hi All,

I am trying to upgrade Exchange Server 2013 to CU3. But, While trying to upgrade i am getting the below error.

The account i used has full access (Schema Admin, Domain, Enterprise admins).

First i tried from CAS Server only. its giving the error . Please let me know if you have any solution

Error:
The following error was generated when "$error.Clear();
    install-DefaultAcceptedDomain -Name $RoleFullyQualifiedDomainName -DomainName $RoleFullyQualifiedDomainName -DomainController $RoleDomainController

" was run: "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.".

Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.

Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.

Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution result should not be affected.

Don't forget to mark helpful or answer

connect me :-

http://in.linkedin.com/in/satya11

http://facebook.com/satya.1000

Hello,

I've exhausted everything I can find on the Internet so I thought I would ask here. I have tried Installing Exchange Server 2013, Exchange Server 2013 CU1 & Exchange Server 2013 CU2 on Freshly Installed Servers running as Primary DC's and also as a standalone server but it keeps failing with the error below -

Error:
The following error was generated when "$error.Clear(); 
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
        " was run: "Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.".

I've created brand new domains with the same result, tried different ISO's absolutely everything I can think of. I've installed all pre-requisites as well. 

See details from \InstallASEntIRS.msilog

Action start 23:13:54: InstallFinalize.
MSI (s) (34:2C) [23:13:54:919]: Executing op: ProductInfo(ProductKey={14F288C7-C695-40D5-971D-8890605C6040},ProductName=Microsoft Exchange 2007 Enterprise Block List Updates,PackageName=ASEntIRS.MSI,Language=1033,Version=50532860,Assignment=1,ObsoleteArg=0,,,PackageCode={813CCA30-0D20-41A2-BD4F-E5F821F379E1},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (34:2C) [23:13:54:919]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (34:2C) [23:13:54:919]: Executing op: DialogInfo(Type=1,Argument=Microsoft Exchange 2007 Enterprise Block List Updates)
MSI (s) (34:2C) [23:13:54:919]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (34:2C) [23:13:54:919]: Executing op: SetBaseline(Baseline=0,)
MSI (s) (34:2C) [23:13:54:919]: Executing op: SetBaseline(Baseline=1,)
MSI (s) (34:2C) [23:13:54:919]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,)
MSI (s) (34:2C) [23:13:54:919]: Executing op: ProgressTotal(Total=1,Type=1,ByteEquivalent=24000)
MSI (s) (34:2C) [23:13:54:919]: Executing op: ComponentRegister(ComponentId={719626CE-DB62-47F5-BADC-3D04F84D9F72},KeyPath=E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\Microsoft.SmartScreen.DomainRep.dat.tmp,State=3,,Disk=1,SharedDllRefCount=0,BinaryType=1)
MSI (s) (34:2C) [23:13:54:934]: Executing op: ActionStart(Name=InstallFiles,Description=Copying new files,Template=File: [1],  Directory: [9],  Size: [6])
MSI (s) (34:2C) [23:13:54:934]: Executing op: ProgressTotal(Total=22,Type=0,ByteEquivalent=1)
MSI (s) (34:2C) [23:13:54:934]: Executing op: SetTargetFolder(Folder=E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\)
MSI (s) (34:2C) [23:13:54:934]: Executing op: SetSourceFolder(Folder=1\gresuowg\agents\Hygiene\|TransportRoles\agents\Hygiene\)
MSI (s) (34:2C) [23:13:54:934]: Executing op: ChangeMedia(,MediaPrompt=Please insert the disk: ,MediaCabinet=data.cab,BytesPerTick=65536,CopierType=2,ModuleFileName=C:\Windows\Installer\31a307.msi,,,,,IsFirstPhysicalMedia=1)
MSI (s) (34:2C) [23:13:54:934]: Executing op: FileCopy(SourceName=ks7fh1qf.tmp|Microsoft.SmartScreen.DomainRep.dat.tmp,SourceCabKey=hygiene.dat,DestName=Microsoft.SmartScreen.DomainRep.dat.tmp,Attributes=512,FileSize=22,PerTick=65536,,VerifyMedia=1,,,,,CheckCRC=0,,,InstallMode=58982400,HashOptions=0,HashPart1=-1084516688,HashPart2=1992721327,HashPart3=63451467,HashPart4=70180982,,)
MSI (s) (34:2C) [23:13:54:934]: File: E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\Microsoft.SmartScreen.DomainRep.dat.tmp;To be installed;Won't patch;No existing file
MSI (s) (34:2C) [23:13:54:934]: Source for file 'hygiene.dat' is compressed
MSI (s) (34:2C) [23:13:54:934]: Executing op: CacheSizeFlush(,)
MSI (s) (34:2C) [23:13:54:934]: Executing op: ActionStart(Name=WriteRegistryValues,Description=Writing system registry values,Template=Key: [1], Name: [2], Value: [3])
MSI (s) (34:2C) [23:13:54:934]: Executing op: ProgressTotal(Total=1,Type=1,ByteEquivalent=13200)
MSI (s) (34:2C) [23:13:54:934]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Microsoft\ExchangeServer\v15\Hygiene,,BinaryType=1,,)
MSI (s) (34:2C) [23:13:54:934]: Executing op: RegAddValue(Name=SmartDRPVersion,Value=3.3.4604.001,)
MSI (s) (34:2C) [23:13:54:934]: Executing op: ActionStart(Name=InstallHygieneW,,)
MSI (s) (34:2C) [23:13:54:934]: Executing op: CustomActionSchedule(Action=InstallHygieneW,ActionType=1025,Source=BinaryData,Target=InstallHygieneW,CustomActionData=0;E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\Microsoft.SmartScreen.DomainRep.dat;E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\Microsoft.SmartScreen.DomainRep.dat.tmp)
MSI (s) (34:A0) [23:13:54:950]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI9BD8.tmp, Entrypoint: InstallHygieneW
MSI (s) (34:14) [23:13:54:950]: Generating random cookie.
MSI (s) (34:14) [23:13:54:950]: Created Custom Action Server with PID 708 (0x2C4).
MSI (s) (34:A4) [23:13:54:966]: Running as a service.
MSI (s) (34:A4) [23:13:54:966]: Hello, I'm your 64bit Impersonated custom action server.
HYGIENE INSTALL: ERROR: failed to get CustomActionData. HRESULT = 0x800700EA
CustomAction InstallHygieneW returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (34:2C) [23:13:54:981]: Note: 1: 2265 2:  3: -2147287035 
MSI (s) (34:2C) [23:13:54:981]: User policy value 'DisableRollback' is 0
MSI (s) (34:2C) [23:13:54:981]: Machine policy value 'DisableRollback' is 0
Action ended 23:13:54: InstallFinalize. Return value 3.
MSI (s) (34:2C) [23:13:54:997]: Executing op: Header(Signature=1397708873,Version=500,Timestamp=1127922108,LangId=1033,Platform=589824,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (34:2C) [23:13:54:997]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (34:2C) [23:13:54:997]: Executing op: DialogInfo(Type=1,Argument=Microsoft Exchange 2007 Enterprise Block List Updates)
MSI (s) (34:2C) [23:13:54:997]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (34:2C) [23:13:54:997]: Executing op: ActionStart(Name=InstallHygieneW,,)
MSI (s) (34:2C) [23:13:54:997]: Executing op: ProductInfo(ProductKey={14F288C7-C695-40D5-971D-8890605C6040},ProductName=Microsoft Exchange 2007 Enterprise Block List Updates,PackageName=ASEntIRS.MSI,Language=1033,Version=50532860,Assignment=1,ObsoleteArg=0,,,PackageCode={813CCA30-0D20-41A2-BD4F-E5F821F379E1},,,InstanceType=0,LUASetting=0,RemoteURTInstalls=0,ProductDeploymentFlags=3)
MSI (s) (34:2C) [23:13:54:997]: Executing op: ActionStart(Name=WriteRegistryValues,Description=Writing system registry values,Template=Key: [1], Name: [2], Value: [3])
MSI (s) (34:2C) [23:13:54:997]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\Microsoft\ExchangeServer\v15\Hygiene,SecurityDescriptor=BinaryData,BinaryType=1,,)
MSI (s) (34:2C) [23:13:54:997]: Executing op: RegRemoveValue(Name=SmartDRPVersion,Value=3.3.4604.001,)
MSI (s) (34:2C) [23:13:54:997]: Executing op: RegCreateKey()
MSI (s) (34:2C) [23:13:54:997]: Executing op: ActionStart(Name=InstallFiles,Description=Copying new files,Template=File: [1],  Directory: [9],  Size: [6])
MSI (s) (34:2C) [23:13:54:997]: Executing op: SetTargetFolder(Folder=E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\)
MSI (s) (34:2C) [23:13:54:997]: Executing op: FileRemove(,FileName=E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\Microsoft.SmartScreen.DomainRep.dat.tmp,,)
MSI (s) (34:2C) [23:13:55:013]: Note: 1: 2318 2:  
MSI (s) (34:2C) [23:13:55:013]: Executing op: ActionStart(Name=ProcessComponents,Description=Updating component registration,)
MSI (s) (34:2C) [23:13:55:013]: Executing op: ComponentUnregister(ComponentId={719626CE-DB62-47F5-BADC-3D04F84D9F72},ProductKey={14F288C7-C695-40D5-971D-8890605C6040},BinaryType=1,)
MSI (s) (34:2C) [23:13:55:013]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
MSI (s) (34:2C) [23:13:55:013]: Error in rollback skipped.Return: 5
MSI (s) (34:2C) [23:13:55:013]: Note: 1: 2318 2:  
MSI (s) (34:2C) [23:13:55:013]: No System Restore sequence number for this installation.
MSI (s) (34:2C) [23:13:55:013]: Unlocking Server
MSI (s) (34:2C) [23:13:55:028]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
Action ended 23:13:55: INSTALL. Return value 3.
MSI (s) (34:2C) [23:13:55:028]: Note: 1: 1708 
MSI (s) (34:2C) [23:13:55:028]: Note: 1: 2205 2:  3: Error 
MSI (s) (34:2C) [23:13:55:028]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1708 
MSI (s) (34:2C) [23:13:55:028]: Note: 1: 2205 2:  3: Error 
MSI (s) (34:2C) [23:13:55:028]: Note: 1: 2228 2:  3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709 
MSI (s) (34:2C) [23:13:55:028]: Product: Microsoft Exchange 2007 Enterprise Block List Updates -- Installation failed.

MSI (s) (34:2C) [23:13:55:028]: Windows Installer installed the product. Product Name: Microsoft Exchange 2007 Enterprise Block List Updates. Product Version: 3.3.4604.001. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

MSI (s) (34:2C) [23:13:55:028]: Deferring clean up of packages/files, if any exist
MSI (s) (34:2C) [23:13:55:028]: MainEngineThread is returning 1603
MSI (s) (34:18) [23:13:55:028]: RESTART MANAGER: Session closed.
MSI (s) (34:18) [23:13:55:028]: No System Restore sequence number for this installation.
=== Logging stopped: 9/26/2013  23:13:55 ===
MSI (s) (34:18) [23:13:55:043]: User policy value 'DisableRollback' is 0
MSI (s) (34:18) [23:13:55:043]: Machine policy value 'DisableRollback' is 0
MSI (s) (34:18) [23:13:55:043]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (34:18) [23:13:55:043]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
MSI (s) (34:18) [23:13:55:043]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
MSI (s) (34:18) [23:13:55:043]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI (s) (34:18) [23:13:55:043]: Destroying RemoteAPI object.
MSI (s) (34:14) [23:13:55:043]: Custom Action Manager thread ending.
MSI (c) (04:D4) [23:13:55:043]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
MSI (c) (04:D4) [23:13:55:043]: MainEngineThread is returning 1603
=== Verbose logging stopped: 9/26/2013  23:13:55 ===

This Is the end of the log file for information. Also see the Exchange Setup Log below -

[09/26/2013 22:13:54.0545] [1] Setup failed previously while performing the action Install.  Looking for the failed task with ID TransportCommonComponent___0950ec0c6c894ec8ad384dc89415c394.
[09/26/2013 22:13:54.0545] [1] 249 tasks were found to run.
[09/26/2013 22:13:54.0545] [1] Processing component 'Transport Common Configuration' (Configuring common Transport properties.).
[09/26/2013 22:13:54.0545] [1] Executing: 
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir

[09/26/2013 22:13:54.0576] [2] Active Directory session settings for 'Install-MsiPackage' are: View Entire Forest: 'True', Configuration Domain Controller: 'JACOB-EX01.JACOB.local', Preferred Global Catalog: 'JACOB-EX01.JACOB.local', Preferred Domain Controllers: '{ JACOB-EX01.JACOB.local }'
[09/26/2013 22:13:54.0576] [2] User specified parameters:  -PackagePath:'E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI' -LogFile:'C:\ExchangeSetupLogs\InstallASEntIRS.msilog' -PropertyValues:'ALLUSERS=1' -UpdatesDir:$null
[09/26/2013 22:13:54.0576] [2] Beginning processing install-MsiPackage
[09/26/2013 22:13:54.0654] [2] ProductCode is '14f288c7-c695-40d5-971d-8890605c6040'.
[09/26/2013 22:13:54.0670] [2] PackagePath was set to 'E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI'; changing to full path 'E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI'.
[09/26/2013 22:13:54.0685] [2] ProductCode is '14f288c7-c695-40d5-971d-8890605c6040'.
[09/26/2013 22:13:54.0685] [2] Installing MSI package 'E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI'.
[09/26/2013 22:13:54.0685] [2] No updates directory was specified for the msi installation.
[09/26/2013 22:13:54.0685] [2] Installing a new product. Package: E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI. Property values: ALLUSERS=1 REBOOT=ReallySuppress
[09/26/2013 22:13:55.0043] [2] [ERROR] Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
[09/26/2013 22:13:55.0043] [2] [ERROR] Fatal error during installation
[09/26/2013 22:13:55.0043] [2] [ERROR] Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
[09/26/2013 22:13:55.0043] [2] [ERROR] Fatal error during installation
[09/26/2013 22:13:55.0043] [2] [ERROR] Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
[09/26/2013 22:13:55.0043] [2] [ERROR] Fatal error during installation
[09/26/2013 22:13:55.0060] [2] Ending processing install-MsiPackage
[09/26/2013 22:13:55.0060] [1] The following 1 error(s) occurred during task execution:
[09/26/2013 22:13:55.0060] [1] 0.  ErrorRecord: Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
[09/26/2013 22:13:55.0060] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603. ---> System.ComponentModel.Win32Exception: Fatal error during installation
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.Deployment.InstallMsi.InstallPackageFile(String packagePath)
   at Microsoft.Exchange.Management.Deployment.InstallMsi.InternalProcessRecord()
   at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
[09/26/2013 22:13:55.0060] [1] [ERROR] The following error was generated when "$error.Clear(); 
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
        " was run: "Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.".
[09/26/2013 22:13:55.0060] [1] [ERROR] Installing product E:\Microsoft Exchange\Program Files\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI failed. Fatal error during installation. Error code is 1603.
[09/26/2013 22:13:55.0060] [1] [ERROR] Fatal error during installation
[09/26/2013 22:13:55.0060] [1] [ERROR-REFERENCE] Id=TransportCommonComponent___0950ec0c6c894ec8ad384dc89415c394 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[09/26/2013 22:13:55.0060] [1] Setup is stopping now because of one or more critical errors.
[09/26/2013 22:13:55.0060] [1] Finished executing component tasks.
[09/26/2013 22:13:55.0075] [1] Ending processing Install-BridgeheadRole
[09/26/2013 22:18:18.0936] [0] End of Setup
[09/26/2013 22:18:18.0936] [0] **********************************************

Please advise if possible as this has me at the end of my patience with Exchange 2013!

Thanks In Advance,

Jacob

Hello,

Today I make a fresh install of the windows server 2012 STD, installed differents roles et promote my server like Domain controller.

After, I installed MS Exchange 2013 STD on this server with following procedure https://social.technet.microsoft.com/wiki/contents/articles/14506.how-to-install-exchange-2013-on-windows-server-2012.aspx and I encountered the following error during setup progress (installation GUI).

Erreur :
L'erreur suivante est survenue lors de l'exécution de "$error.Clear();
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
        " : "Échec de l'installation du produit « D:\Donnees Entreprise\Messagerie\Microsoft\Exchange Server\V15\TransportRoles\agents\Hygiene\ASEntIRS.MSI ». Erreur irrécupérable lors de l’installation. Le code d'erreur est 1603.".

I uninstall MS Exchange, demote DC and delete the folders created during exchange install and reboot.

After, I promote, reinstall exchange and I have a same error. I verify that the IP V6 is enable, I downloaded the source installation a second time (from MVLS), verify that my computer account is member of the exchange admin group...

Could you help me please because I have not got any solution?

Thanks and kind regards

Guillaume

Hello,

I can not connect from the new Public Folder Management Console to my Exchange 2003.

Only My new Exchange Server 2010 is visable to connect.

Is it possible to connect to my Exchange 2003 Public Folder?

Thanks for the help

Best Regards

Farhad