Quantcast
Channel: Exchange Server 2013 - Setup, Deployment, Updates, and Migration 论坛
Viewing all 7008 articles
Browse latest View live

Unable to migrate user mailbox from one datastore to another datastore status detail stalled due to unkown read

$
0
0

Hi Guys,

I am having trouble moving a user's mailbox from one datastore to another on exchange 2013. It shows a message the it is stalled due to an unknown read. The mailbox is 8 gig and I have been able to migrate it from 2010 to 2013 previously.

Regards

Kaylin


Failed CU5 update, need help recovering

$
0
0

I went to install the CU5 update today and it fails on the step Mailbox role: transport service.

Error:
The following error was generated when "$error.Clear(); 
          $connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
          foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ReceiveConnectorRoleConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MAIL\MFP". Receive connectors assigned to different Transport roles on a single server must listen on unique local IP address & port bindings.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

Error:
The following error was generated when "$error.Clear(); 
          $connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
          foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 5 } };" was run: "Microsoft.Exchange.Management.SystemConfigurationTasks.ReceiveConnectorRoleConflictException: The values that you specified for the Bindings and RemoteIPRanges parameters conflict with the settings on Receive connector "MAIL\Client Frontend MAIL". Receive connectors assigned to different Transport roles on a single server must listen on unique local IP address & port bindings.
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target, Boolean reThrow, String helpUrl)
   at Microsoft.Exchange.Configuration.Tasks.Task.WriteError(Exception exception, ErrorCategory category, Object target)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.SetReceiveConnector.InternalValidate()
   at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
   at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)".

When I try to re-run the setup, it fails at the same spot. I can't use the ECP nor the Shell to remove the Receive Connector (it is just a receive connector for the MFP).

Is there any way to remove this receive connector with Powershell not working?

(It looks like this is the problem: http://exchangemaster.wordpress.com/2014/01/24/incorrectly-adding-new-receive-connector-breaks-exchange-2013-transport/ but since I can't get a shell to run in this failed upgrade state I can't take the recommended fix nor just remove the connector.)

Exchange 2007 move Public Folder database (URGENT!)

$
0
0
Hi,

I am going to move Public Folder to another drive ( From D: to E:) as D: does not have much space only 800MB now.

Public Folder has 7GB white space so I hope it will release some free space on D: drive by using offline defrag until I get another drive to add.

what would be the process to move public folder database to another drive?

How do I tell Exchange 2013 what certificate to present to clients?

$
0
0

I am convinced my clients are getting the wrong certificate and that's why they can't connect. I investigated the certificate they ARE getting and I don't believe it (certificate) is configured correctly and I have another one I'd like to use. How do I tell Exchange 2013 what certificate to present? I had deleted it out of Exchange using the EAC but it is still presented to the Outlook clients.

Fresh Exchange 2013 SP1 installation .NET error ECP panel (Can`t load Microsoft.Exchange.Management.ControlPanel)

$
0
0

Hi,

After a fresh install of a Windows Server 2012R2 installation with Exchange 2013 SP1 (Twice) i cannot get into the ECP panel.

I keep getting a .NET error which states that it can`t load the assembly or an dependency

of Microsoft.Exchange.Management.ControlPanel

I`ve already tried to rebuild the ECP directory but that didn`t work.

Error message is in dutch (Sorry)

Details van uitzondering: System.IO.FileLoadException: Kan bestand of assembly Microsoft.Exchange.Management.ControlPanel of een van de afhankelijkheden hiervan niet laden. Kan handtekening van de sterke naam niet verifiëren. Mogelijk is er geknoeid met de assembly of is deze met vertraging maar niet volledig ondertekend met de juiste persoonlijke sleutel. (Uitzondering van HRESULT: 0x80131045)

Can`t post any images yet untill my account gets verified..

451 4.7.0 Temporary server error. Please try again later. PRX4

$
0
0

Hello,

Mail flow between Exchange 2010 sp3 & Exchange 2013 SP1 not working.

Exchange 2010 when sending mail to external it's ok.

Exchange 2010 when sending mail to exchange 2010 users it's ok.

Exchange 2010 when sending mail to exchange 2013 not working

Exchange 2013 when sending mail to External it's ok.

Exchange 2013 when sending mail to Exchange 2010 or Exchange 2013 not working

From internet --> SMTP GW --> Exchange 2010 it's ok

From Internet --> SMTP GW --> Exchange 2010 --> Exchange 2013 not working.

1 AD site and 1 PDC

With Exchange 2010 exchange 2013 on the same subnet. Exchange 2010 physical machine, Exchange 2013 on Hyper-V ( with same VLAN )

When testing over Exchange 2010 sending mail to exchange 2013 using telnet with commands:

telnet exchange2013.domain.local

mail from: a@b.com

rcpt to: b@b.com

data

test

.

451 4.7.0 Temporary server error. Please try again later. PRX4 (Errors that appear in the telnet screen)

prx2, prx3, or not prx5 just PRX4.

thanks


Bugra Keskin


Cumulative Update 5 for Exchange Server 2013 (KB2936880)

$
0
0

Hi,

i have installed exchange server 2013 on separate servers, I deployed the Mailbox role on the first server, and the CAS role on the second server.

I checked the edition using the exchange management shell on the mailbox server and on the CAS server:

>>>

[PS] C:\Windows\system32>Get-ExchangeServer | fl name,edition,admindisplayversion

Name                : EXMBX
Edition             : Standard
AdminDisplayVersion : Version 15.0 (Build 516.32)

Name                : EXCAS
Edition             : Standard
AdminDisplayVersion : Version 15.0 (Build 516.32)

<<<

My question is, is it possible to update this current edition to the "Cumulative update 5 for Exchange Server 2013 (KB293688) ?

if it is, in my case, on which servers should i install this update ? on the Mailbox server ? or on the CAS server ?

i appreciate you fast response,

Thanks.

Enabling Office Web Apps for OWA - No event IDs at all!

$
0
0

I am attempting to configure Office Web Apps for Outlook Web App (why on earth did they name them both OWA!?)

I have used this guide from Microsoft with no errors:

http://technet.microsoft.com/en-us/library/jj150495(v=exchg.150).aspx

with this guide as well for reference:

http://www.msexchange.org/articles-tutorials/exchange-server-2013/management-administration/exchange-2013-office-web-apps-server-integration.html

I am using my Office Web App Server that we use for Sharepoint and Lync (so it's already confirmed working). 

In the guide, they state that I'm looking for Event ID 140 and 142 (meaning successful config) and a 141 Event for a failure. Problem is, I'm not getttingany events. It's like I'm not entering the powershell commands at all. 


A wise man is a fool, with a good memory.


sp1 failed on exchange 2013

$
0
0

Hello i've installed SP1 on exchnage 2013 ( windows 2012 ) ant it failed with this error

ErrorRecord: Échec de l'installation du produit « D:\temp\en\MSSpeech_SR_TRANS.en-US.msi ». Erreur irrécupérable lors de l’installation. Le code d'erreur est 1603.
[06/03/2014 11:55:49.0102] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Échec de l'installation du produit « D:\temp\en\MSSpeech_SR_TRANS.en-US.msi ». Erreur irrécupérable lors de l’installation. Le code d'erreur est 1603. ---> System.ComponentModel.Win32Exception: Erreur irrécupérable lors de l’installation
   --- Fin de la trace de la pile d'exception interne ---

OWA still redirects to Exchange 2007 (legacy) after mailbox-move to Exchange 2013

$
0
0

Hi,

I am in the process of implementing Exchange 2013 in coex with 2007. I am testing now in a copy of the production environment and have installed the Exchange 2007 SP3 RU11 prior to installing Exchange 2013 using the SP1 media.

We use a wildcard certificate and I prepared the Exchange 2007 internal/external URLs for OWA/OAB/etc to use the legacy.domain.com names and in Exchange 2013 I set them all to email.domain.com. Exchange 2013 has Outlook Anywhere configured.

All tests like autodiscover (internally via SCP) run fine and for a new Exchange 2013 mailbox the Outlook and OWA functionality is as expected. A mailbox still on 2007 also connects fine via Outlook and while connecting to OWA (using the htps://email.domain.com/owa url) also redirects me to https://legacy.domain.com/owa just fine.

HOWEVER: after a successfull mailbox-move from 2007 to 2013 my OWA logon-request STILL get's redirected to the 2007 legacy URL. When I then logon again on the 2007 OWA I get the message that I should connect to the 2013 URL and end-up in a loop.

Anyone any tips where to search?

Many thanks in advance.


Best regards and many thanks in advance, Eric Vegter

Exchange 2013 BPA results???

$
0
0

I have 3 new exchange 2013 physical servers, all 3 return this BPA critical error, see below - doesn't make sense.

New Migration Batch Command (Correct Syntax)

$
0
0

Hey All,

Forgive my ignorance here but I'm trying to get a batch migration underway and I'm having a nightmare getting the syntax to work can someone shed some light on this for me, I've got;

New-MigrationBatch -Name -FailedUsers -CSVData ([System.IO.File]::ReadAllBytes("'C:\Exchange Migration\Batch1Users.csv'")) -TargetDatasbases @(DB01, DB02, DB03)

Cannot process argument transformation on parameter 'CSVData'. Cannot convert value

 Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:108
+ ... etDatasbases @(DB01 DB02 DB03)

This has been taken from the TechNet article and its failing on the CSVData and also the TargetDatabases

HELP!! :)


R182


Unable to access Exchange Admin Center from fresh Exchange 2013 Install on Server 2012 R2

$
0
0

I am able to get into the log in screen and upon entering my creds "example\example" and my password I receive the following error:

Server Error in '/ecp' Application.

Invalid provider type specified.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Security.Cryptography.CryptographicException: Invalid provider type specified.


Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:
[CryptographicException: Invalid provider type specified.
]
   System.Security.Cryptography.Utils.CreateProvHandle(CspParameters parameters, Boolean randomKeyContainer) +5368074
   System.Security.Cryptography.Utils.GetKeyPairHelper(CspAlgorithmType keyType, CspParameters parameters, Boolean randomKeyContainer, Int32 dwKeySize, SafeProvHandle& safeProvHandle, SafeKeyHandle& safeKeyHandle) +138
   System.Security.Cryptography.RSACryptoServiceProvider.GetKeyPair() +221
   System.Security.Cryptography.X509Certificates.X509Certificate2.get_PrivateKey() +516
   Microsoft.Exchange.HttpProxy.FbaModule.ParseCadataCookies(HttpApplication httpApplication) +1222
   Microsoft.Exchange.HttpProxy.FbaModule.OnBeginRequestInternal(HttpApplication httpApplication) +254
   Microsoft.Exchange.HttpProxy.<>c__DisplayClass8.<OnBeginRequest>b__7() +1479
   Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate) +40
   Microsoft.Exchange.HttpProxy.Diagnostics.SendWatsonReportOnUnhandledException(MethodDelegate methodDelegate) +408
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165


Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34009 

Any help/details on how to get this issue resolved would be greatly appreciated.

Thanks!

Exchange 2013 installation fails

$
0
0

We're in the process of migrating from Exchange 2007 to Exchange 2013.  I've followed the prerequisites, and have the necessary account permissions, but when I start the installation it fails at step 1 of 5 (mailbox role:mailbox service).

This warning shows up in the application log:

Event ID 2397 Process ExSetupUI.exe (PID=9844). Object [CN=Mailbox Database 1783948598,CN=Databases,CN=Exchange

Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=<domain>,CN=Microsoft Exchange,CN=Services,

CN=Configuration,DC=<domain>,DC=local]. Property [Server] is set to value [<Exchange 2013 server name> DEL:492ae292-f89f-4a29-b009-22a60973a4bf], it is pointing to the Deleted Objects container in Active

Directory. This property should be fixed as soon as possible.


This error shows up in the Exchange install console, as well as the application log:

Event ID 1002

Exchange Server component Mailbox role: Mailbox service failed. 
Error: Error:
The following error was generated when "$error.Clear(); 
          if (($RoleIsDatacenter -ne $true) -and ($RoleIsDatacenterDedicated -ne $true))
          {
            if (test-ExchangeServersWriteAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue)
            {
              # upgrade the discovery mailboxes to R5 version, this will fix the RecipientDisplayType property of the discovery mailbox which was wrong in R4.
              get-mailbox -RecipientTypeDetails DiscoveryMailbox -DomainController $RoleDomainController | where {$_.IsValid -eq $false} | set-mailbox -DomainController $RoleDomainController
              $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
              $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
              $mbxs = @( get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1 );
              if ( $mbxs.length -eq 0) 
              {
                $dbs = @(get-MailboxDatabase -Server:$RoleFqdnOrName -DomainController $RoleDomainController);
                if($dbs.Length -ne 0) 
                {
                  $mbxUser = @(get-user -Filter {name -eq $name} -IgnoreDefaultScope -ResultSize 1);
                  if ($mbxUser.Length -ne 0) 
                  {
                    enable-mailbox -Discovery -identity $mbxUser[0] -DisplayName $dispname -database $dbs[0].Identity;
                  }
                }
              }
            }
            else
            {
              write-exchangesetuplog -info "Skipping creating Discovery Search Mailbox because of insufficient permission."
            }  
          }" was run: "The Exchange server for the database object "Mailbox Database 1783948598" wasn't found in Active Directory Domain Services. The object may be corrupted.".
I should also mention that this installation was attempted once before by an ex-coworker, and it failed.  I've spent hours searching Google but haven't come up with a solution.  Does anyone have any ideas?

Cannot uninstall Exchange 2013 - Cannot get ecp page too.

$
0
0

I am trying to install Exchange 2013 and we already have Exchange 2007 in our production environment.

Running the command get-exchangeserver |fl give the following. It shows IsCleintAccessServer : False, I am pretty sure I did select both the roles at the time of installation.

IsHubTransportServer            : True
IsClientAccessServer            : False
IsExchange2007OrLater           : True
IsEdgeServer                    : False
IsMailboxServer                 : True
IsE14OrLater                    : True
IsE15OrLater                    : True
IsProvisionedServer             : False
IsUnifiedMessagingServer        : True
IsFrontendTransportServer       : False

I can see all the virtual folders in IIS and while trying to access the ecp page using https://localhost:444/ecp?exchclientver=15, it says "Sorry! Access Denied".

Get-ecpvirtualdirectory gives no output.

If I try to uninstall I get the following error.

Error:
Uninstall can't continue. Database Mailbox Database 0424069483 : This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, public folder mailboxes or arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox -Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive. To get a list of all public folder mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -PublicFolder. To get a list of all arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration. To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive. To disable a public folder mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -PublicFolder. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>. If this is the last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan <MailboxPlan ID> -Database <Database ID>. It was running the command 'Remove-MailboxDatabase 'CN=Mailbox Database 0424069483,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=XYZ,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=XYZ,DC=X,DC=X' -whatif'.

I would like to uninstall this server and do a fresh install. Tried recover option too, still facing same problem.

HELP!!!


Enable default Mailboxes created by Exchange 2013

$
0
0

I was trying to uninstall exchange 2013 and in that process I disabled two default mailboxes created by Exchange 2013.

Reason to uninstall was because my CAS was missing, re ran setup and installed CAS but now want to enable the disabled default mailboxes.

But now cannot even mount the database.

I get the following error while mounting the database.

Couldn't mount the database that you specified. Specified database: Mailbox Database 0424069483; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database. (hr=0x80004005, ec=1108) Diagnostic context: Lid: 65256 Lid: 10722 StoreEc: 0x454 Lid: 1494 ---- Remote Context Beg ---- Lid: 45120 dwParam: 0x435BE7B2 Lid: 57728 dwParam: 0x435BE83F Lid: 46144 dwParam: 0x435BE89C Lid: 34880 dwParam: 0x435BE89C Lid: 34760 StoreEc: 0xFFFFFB4A Lid: 46144 dwParam: 0x435BEC65 Lid: 34880 dwParam: 0x435BEC65 Lid: 54472 StoreEc: 0x1388 Lid: 42184 StoreEc: 0x454 Lid: 1750 ---- Remote Context End ---- Lid: 1047 StoreEc: 0x454 [Database: Mailbox Database 0424069483, Server: xyz.com].

Please help - I had disabled the mailboxes on 12th of last month so still have few days to enable it before it gets deleted permanently.

Exchange 2010 - 2013 Mailbox move - Syncing with no progress (Stalled?)

$
0
0

I'm in the process of moving mailboxes from Exchange 2010 to Exchange 2013, the major of the mailboxes have moved successfully, however I did not anticipate the additional space required by Exchange 2013 and ran out of disk space during the mailbox move, and some mailboxes did not move successfully.

I have since added additional space but can't seem to get the remaining mailboxes to sync.

I have tried :

Rebooting

Clearing out migration batches and recreating

Stopping and resuming batches.

I see nothing helpful in the Migration log files.

2013-05-20T23:59:57.904Z,14,MigrationServicelet,Information,",827890ff-522d-4c13-9f42-96fbfefb57f4,,","Job type ExchangeLocalMove, status SyncStarting, result Working, length 0.2724593, job :827890ff-522d-4c13-9f42-96fbfefb57f4:ExchangeLocalMove:Staged:4::SyncStarting:2013-05-17 2:59:12 PM::"

When I download the report for one of the users I see this, but don't know what it means :

The job is currently stalled due to 'Content Indexing' lagging behind on resource 'CiAgeOfLastNotification(Mailbox Database 2065686096)'

For one of the other users the downloaded report only shows :

​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​2013-05-16 2:11:18 PM  '' created move request.


DWW

Additional Info:  I followed the info located here in regards to creating the ContentSubmitters group:

http://www.bullspit.co.uk/2013/04/08/exchange-2013-content-indexing-during-migration/

My mailbox database currently has Content index state: FailedAndSuspended

I only have one database, I am not using DAG

Exchange Server 2013 and Office 365 Integration

$
0
0
If we are using Exchange Server 2013 on premise, can we have 2 of our users integrated with Office 365 so that they can utilize their Exchange Server email account with the apps and features of Office 365?

Office 365 Hybrid Integration?

$
0
0

We have setup Office 365, we have added Single Sign-on with ADFS/ADFS Proxy and we have run the Hybrid configuration Wizard which completed successfully. Users are able to sign on to Office 365 and users are able to use OWA on-premise, but I am confused on how we get all these to work together and not separately. Is there a specific license we need that allows the user to see both their On Premise Mail plus OneDrive together?

We are using Exchange 2013 as our mail provider and currently we have the Education A2 plan.

Thank you in advance

Jesse,

Mailbox Migrations and Database Replications

$
0
0

Hey there,

I have an existing exchange 2010 2x member dag and now a new exchange 2013 2x member dag in coexistence mode.

After testing with a few mailboxes, migrations were extremely slow, and I cannot do that for our entire environment.  So I removed one of the 2013 DAG members, leaving a single exchange 2013 member by itself in the dag.  Mailbox migration speed increased from 15MB per minute to 350MB per minute.

Here is my question, either 1 or 2, or none of those, in which case I would love if you could give me option 3.

1.  Should I continue to migrate the entire environment to the single new exchange 2013 server, and after migrations are complete, add the 2nd dag member and make database copies?

2. Or should I add the 2nd member back into the dag first, and use the Suspend-MailboxDatabaseCopy command to suspend database copies until the migrations are done, then resume it?


Andrew Huddleston | Hillsong Church | Sydney

Viewing all 7008 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>